Old Neoware 3000 Thin CLient for Wifi Captive Portal Only
-
I have an old Neoware 3000 thin client that I would like to use as an internet access captive portal only with pfsense.
This is due to a problem I have with 3 interfaces and SIP on the main pfsense box which leads to missed calls etc. Swapping out the network card for wifi should do the trick.
The neoware can have a maximum of 256mb and has a 300Mhz geode cpu. It can boot from compact flash and has an empty pci slot for a network card.
Is it likely to be good enough for a maxiumum throughput of around 50 - 70mb/s in total?
Thanks for reading. -
From Hardware Sizing Guidance
10-20 Mbps
We recommend a modern (less than 4 year old) Intel or AMD CPU clocked at at least 500MHz21-100 Mbps
We recommend a modern 1.0 GHz Intel or AMD CPU -
Thanks for replying.
I don't need any features other than the captive portal for wifi, for a maximum of 2 connections at any one time.
I'm hoping that that will make a difference to the hardware requirements -
Try it and see, you already have the hardware. If you really don't need anything other than captive portal you may be able to disable a lot of things to improve performance.
Steve