NUT UPS with blazer_usb wont start
-
pfSence 2.1.4, Mobo - Jetway NF99FL-525.
I have a UPS that has been running fine on a CentOS server using the blazer_usb driver for a couple of years. I'm now trying to get this UPS working on Pfsense (different hardware). The problem I am having is that Nut will not start.
Plugging the UPS in produces the following in syslog:
kernel: ugen0.2: <vendor 0xffff="">at usbus0
kernel: uhid0: <vendor 0="" 2="" 0xffff="" 068a,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
kernel: device_attach: uhid0 attach returned 12Attempting to start Nut manually with "/usr/local/etc/rc.d/nut.sh start" :
starting blazer_usb
Network UPS Tools - UPS driver controller 2.6.5
Network UPS Tools - Megatec/Q1 protocol USB driver 0.09 (2.6.5)
Permissions problem: Input/output error
Driver failed to start (exit status=1)
blazer_usb failed to startAttempting to start the driver with "/usr/local/libexec/nut/blazer_usb -a CXR-1500 -DDDD "
Network UPS Tools - Megatec/Q1 protocol USB driver 0.09 (2.6.5)
0.000000 debug level is '4'
0.003816 Checking device (FFFF/0000) (/dev/usb//dev/ugen0.2)
0.027852 - VendorID: ffff
0.027883 - ProductID: 0000
0.027897 - Manufacturer:
0.027910 - Product: 068A
0.027923 - Serial Number: unknown
0.027936 - Bus: /dev/usb
0.027948 Trying to match device
0.027968 Device matches
0.203082 Trying megatec protocol…
0.203167 send: Q1
0.474886 read: Unknown error
0.475120 Permissions problem: Input/output errorBoth the above commands produces this in syslog:
kernel: uhid0: <vendor 0="" 2="" 0xffff="" 068a,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
kernel: device_attach: uhid0 attach returned 12I have done a lot of searching but not turned up anything that helped. Hopefully someone here can help.
Thanks in advance.</vendor></vendor></vendor>
-
Nobody? :-\