Valn Issue
-
Vlan not working as expected.
Interface configuration :
fxp0_vlan5: flags=88a43 <up,broadcast,running,allmulti,simplex,multicast,staticarp>metric 0 mtu 1500
options=103 <rxcsum,txcsum,tso4>ether 00:1a:8c:11:26:5e
inet6 fe80::21a:8cff:fe11:264c%fxp0_vlan5 prefixlen 64 scopeid 0x9
inet 172.16.10.1 netmask 0xffffff00 broadcast 172.16.10.255
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 5 vlanpcp: 0 parent interface: fxp0tcpdump on the vlan interface :
[2.2-ALPHA][root@pfsense.sg.local]/root(13): tcpdump -nei fxp0_vlan5
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on fxp0_vlan5, link-type EN10MB (Ethernet), capture size 65535 bytes
capability mode sandbox enabled
14:02:12.305427 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:13.304054 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:14.304027 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:14.973545 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 346: vlan 5, p 0, ethertype IPv4, 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:18:8b:a6:5c:36, length 300
14:02:15.321380 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:16.319966 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:17.320015 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:18.337284 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:19.335997 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:19.748572 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 346: vlan 5, p 0, ethertype IPv4, 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 00:18:8b:a6:5c:36, length 300
14:02:20.335964 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:21.353312 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42
14:02:22.351968 00:18:8b:a6:5c:36 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 5, p 0, ethertype ARP, Request who-has 172.16.10.1 tell 172.16.10.50, length 42first i tried the setup with my cisco multi layer switch and with linux routers.
if you need more information please let me know.
it think it can be the same issue as the "vlanpcp" .
thank you in advance</full-duplex></performnud,auto_linklocal></rxcsum,txcsum,tso4></up,broadcast,running,allmulti,simplex,multicast,staticarp>