Routing network from vpn client to lan network
-
Hi everyone, I have problem when create vpn network
My Lan network is : 11.0.0.0/8
My VPN network is: 172.20.0.0/16
My pfsense ip is: 11.11.11.11/8
I have push route "11.0.0.0 255.0.0.0"When I connect vpn to my network. it ok. I can access to pfsense with IP 11.11.11.11 but I can't access to another client in my lan network. I have check route on my laptop, here is route table. I see that route to network 11.0.0.0/8 have been created.
I attached some image here.
All firewall rule is default.
Thanks for your help.
![9-3-2014 2-47-50 PM.png](/public/imported_attachments/1/9-3-2014 2-47-50 PM.png)
![9-3-2014 2-47-50 PM.png_thumb](/public/imported_attachments/1/9-3-2014 2-47-50 PM.png_thumb)
![9-3-2014 2-48-07 PM.png](/public/imported_attachments/1/9-3-2014 2-48-07 PM.png)
![9-3-2014 2-48-07 PM.png_thumb](/public/imported_attachments/1/9-3-2014 2-48-07 PM.png_thumb)
![9-3-2014 2-48-52 PM.png](/public/imported_attachments/1/9-3-2014 2-48-52 PM.png)
![9-3-2014 2-48-52 PM.png_thumb](/public/imported_attachments/1/9-3-2014 2-48-52 PM.png_thumb) -
Hi,
you don't need the "push route" for your lan subnet, as it is already done by entering the range in the IPv4 local network(s).
From reading briefly your description, it seems you need to add a rule (menu -> goto Firewall:Rules -> tab OpenVPN) to allow your clients (172.20.0.0/16 (an awefull large range for VPN clients btw :o)) access to *
Do you have such a rule in place? -
Make sure there's an any/any rule on your openvpn tab.
Post your server1.conf.