Dual router setup help in vmplayer
Ello all, i have a question. i am expereincign some confusion. maybe due to lack of sleep from statics and diff eq class or im forgetting a setting.
Here is my setup i have made in vmplayer.
In vmplayer i have created 4 lan segments
UTAH-Private (ID# = 29:1F IP 192.168.1.1/24)
NY-Private (ID# = 7E:D5 IP 192.168.2.1/24)
UTAH-out (ID# = 29:15 IP 10.0.0.1/8)
NY-out (ID# = 7E:CB IP 10.0.0.2/8)
Ok, so when i created UTAH ROUTER, i put two mics in it and nic0 is UTAH-out (ID# = 29:15 IP 10.0.0.1/8)
nic1 is UTAH-Private (ID# = 29:1F IP 192.168.1.1/24)
the config of pfsense confirms this. Pings from inside pfsense work.
NY ROUTER has two nics. nic0 is connected to lan segment NY-out (ID# = 7E:CB IP 10.0.0.2/8)
and nic1 is connected to lan segment NY-Private (ID# = 7E:D5 IP 192.168.2.1/24).
the configs confirm and pings work with in the shell.
Ok, so i put a linux box on the private side of each router and log into the web config and turn off firewall so that i can just route.
ok, so, here is the issue, UTAH-out can ping NY-out but UTAH-Private cant ping NY-out.
NY-out can ping UTAH-out but NY-Private cant ping UTAH-out.
what do i need to do to make sure pings can gofrom one private side to the other?
Also, can pfsense run OSPF i do not want to work with RIP unless its version 2. but i would prefere a more intelligent protocol such as OSPF
This is a setup for my pen test lab.