Cannot install PfSense APU
-
Edit:
So…I have no idea what i'm doing.
I have downloaded all the images from the PfSense site, from nano to full, i386 to amd64.
Most of them crap out at:
drive 0x000f2520: PCHS=0/0/0 translation=lba LCHS=1024/32/63 s=2076672
Space available for UMB: c0000-ee800, f0000-f2520
Returned 253952 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000df14e000 = 1 RAM
4: 00000000df14e000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00I have 1 image <nano 1gb="">That gives me the choice on the bootup:
Booting from Hard Disk...
1 PfSense
2 PfSenseI select either, and I get '/' (it used to spin when I was doing this on a 386board.
I'm at a loss as to what i'm doing wrong and would really like some guidance.
Does it matter size of Flash Drive? I'm using a 2gb USB Flash...What I'm doing:
Plug Jump Drive in.
dd if=/dev/zero of=/dev/sdb
let that run
format
dd if=/Pfsenseimagetoburn of=/dev/sdb bs=16kI know the writting of zero's is not nescassary....</nano>
-
Issue is resolved.
It was user error…..Make sure your connection speed is 9600 and not the apu default.