Pfsense as router
-
dear all,
i turned install pfsense 2.1.5 on my old pc with two NIC. i configure re0 as WAN with ip 192.168.1.x/24 and re1 as LAN with 192.168.2.x/24. but i am unable to access the internet behind the pfsense.
please guide any toturial help etcRegards,
ishtiaq
-
@ishtiaqaj:
dear all,
i turned install pfsense 2.1.5 on my old pc with two NIC. i configure re0 as WAN with ip 192.168.1.x/24 and re1 as LAN with 192.168.2.x/24. but i am unable to access the internet behind the pfsense.
please guide any toturial help etcRegards,
ishtiaq
Is your WAN interface set to block RFC1918 space?
You know that the WAN interface is not using a public facing IP, right?
-
@ishtiaqaj:
dear all,
i turned install pfsense 2.1.5 on my old pc with two NIC. i configure re0 as WAN with ip 192.168.1.x/24 and re1 as LAN with 192.168.2.x/24. but i am unable to access the internet behind the pfsense.
please guide any toturial help etcRegards,
ishtiaq
How do you get public IP, I mean how do you connect internet? Modem, other Router?
-
Is your WAN interface set to block RFC1918 space?
You know that the WAN interface is not using a public facing IP, right?
This wouldn't matter. It only affects unsolicited inbound traffic.
OP- What do you have for-
1. outbound firewall rules?
2. outbound NAT
Try and set your WAN as dhcp.
-
Dear all,
i am going to attache the interface status it will clear more to you to help me.
on LAN devices are getting ip from pf-sense but unable to use internet
-
That interface status looks good.
What firewall rules are on LAN?
Can a LAN device ping to pfSense LAN IP?
What outbound NAT is selected? (Firewall->NAT, Outbound, should be using automatic outbound NAT. -
1st thing I would look at …..
Does the 192.168.1.1 device have a route back to the 192.168.2.0 network??
-
It shouldn't need a route because pfSense is NATing between them.
Seems very likely that you have no upstream connection for some reason. On the pfSense dashboard in the webgui does it show 'you are on the latest version' or 'unable to check for updates' ?
Steve
-
thank all it is working no.
there was gateway problem which i sort out.