<![CDATA[Squid/squidguard on an APU1d4 with 16gb msata]]>i am trying to install squid/squidguard on an APU1d4 with 16gb msata

=ive use the APUTinyCore in installing the amd64 nano and was successfull
=fdisk shows 4 partitions (1.8gb for pfsense and the other 3  are unused)

question
=how will i do the installation such that it will still use the 1.8gb for pfsense and i will use the rest (14GB) for my squid/squidguard
=and how should i allocate that on the squid configuration
=if it is difficult to do this, will full install be of help in this case? but am just worried about wear/tear of the msata

thanks for any help

]]>https://forum.netgate.com/topic/76415/squid-squidguard-on-an-apu1d4-with-16gb-msataRSS for NodeWed, 15 Apr 2026 20:07:28 GMTSun, 30 Nov 2014 09:20:33 GMT60<![CDATA[Reply to Squid/squidguard on an APU1d4 with 16gb msata on Wed, 17 Dec 2014 00:51:40 GMT]]>bump. Do you want to use squid cache on a separate disk (msata) ? If so im also looking for the answer.
im running the enbedded version on a SD card but would like to use my msata disk for cache. Does anyone know how to achieve this?

]]>https://forum.netgate.com/post/501687https://forum.netgate.com/post/501687Wed, 17 Dec 2014 00:51:40 GMT<![CDATA[Reply to Squid/squidguard on an APU1d4 with 16gb msata on Mon, 01 Dec 2014 03:55:17 GMT]]>no cables…its a miniPCIe slot

]]>https://forum.netgate.com/post/498620https://forum.netgate.com/post/498620Mon, 01 Dec 2014 03:55:17 GMT<![CDATA[Reply to Squid/squidguard on an APU1d4 with 16gb msata on Sun, 30 Nov 2014 12:54:26 GMT]]>Just a OT question:

Which cable do you use to connect  the apu1d4 with the msata?

Greez

]]>https://forum.netgate.com/post/498530https://forum.netgate.com/post/498530Sun, 30 Nov 2014 12:54:26 GMT