No LAN IP Address How do I re added
I just install Pfsense on a CF Card that is running Pfsense on old firebox x router I got it online but under interface tab there is only WAN IP address no LAN how do I re-added ?
Please see attached screenshot.
You should be able to go to "Interfaces->assign" then on Interface Assignments click on the "+" at the bottom of the window to add in a new interface. You can choose which hardware NIC you attach to the interface from the drop down box (little black arrow).
Was this working originally and you managed to remove the LAN assignment or did it not install at all?
KOM last edited by
Also, that version is a thousand years old already. Grab at least 2.1.5 if not 2.2-RC.
When you add the LAN interface you will lose access to the webgui via the WAN. Make sure you've added enough settings to the LAN to allow you to connect to it or add a firewall rule to WAN to allow continued access.
that can also be easiley configured through the console menus.