<![CDATA[How to forward Syslog information to monitoring system]]>I am trying to use PRTG to monitor specific messages from the pfSense syslog.

The Syslog Receiver sensor is a passive one, ,meaning it sits and wait to receive the log information from other systems. So I have to figure it out where in pfSense do I configure it to send the Syslog information to IP address and port that PRTG will be listening….

Anyone knows where can I configure this?

Regards,

Paulo Tebet

]]>https://forum.netgate.com/topic/80029/how-to-forward-syslog-information-to-monitoring-systemRSS for NodeMon, 08 Jun 2026 04:37:05 GMTWed, 18 Feb 2015 17:56:00 GMT60<![CDATA[Reply to How to forward Syslog information to monitoring system on Wed, 18 Feb 2015 19:55:37 GMT]]>enable SNMP in pfSense and have PRTG auto discover the services on the box.

]]>https://forum.netgate.com/post/520805https://forum.netgate.com/post/520805Wed, 18 Feb 2015 19:55:37 GMT<![CDATA[Reply to How to forward Syslog information to monitoring system on Wed, 18 Feb 2015 18:12:31 GMT]]>Looking at the pfSense interface I found some interesting information.

On the System/Advanced/Notification

There is a Growl section which looks like what I am looking for. You can define the IP address and Port on the destination Growl server, among other things. But I don't think this will work if in the other end we have a PRTG server and not a Growl server….

I also found in Services / Zabbix Agent....  So If were using the Zabbix instead of the PRTG I would be able to configure pfSense to send information to the IP address and port of the Zabbix.... But I would like to use PRTG...

So is there any "PRTG Agent" for the pfSense??

Regards,

Paulo Tebet

]]>https://forum.netgate.com/post/520781https://forum.netgate.com/post/520781Wed, 18 Feb 2015 18:12:31 GMT