<![CDATA[NOKIA IP530 fail to upgrade to 2.2 from 2.1.5]]>Hello, I'm trying to upgrade to pfsense 2.2 from 2.1.5 but it fails.
I have the the same issue for a fresh install in CF2 gb.

I have this error on consolle:

/boot/config: -h
Consoles: serial port
BIOS drive C: is disk0
BIOS 639kB/1047552kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(root@pfsense-22-i386-builder, Thu Jan 22 15:01:13 CST 2015)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x11ef5d9 data=0x832d70+0x279e60 syms=[0x4+0xf33b0+0x4+
0x16b3ec]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]…
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:19:32 CST 2
015
    root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wr
ap.10.i386 i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel Pentium III (721.09-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Family = 0x6  Model = 0x8  Stepping = 10
  Features=0x387f9ff<fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pa<br>T,PSE36,PN,MMX,FXSR,SSE>
real memory  = 1073741824 (1024 MB)
avail memory = 1016889344 (969 MB)
random device not loaded; using insecure entropy
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0809320, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc08093d0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw
/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0809480, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0831ab0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0831b60, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi
/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0831c10, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
random: <software, yarrow="">initialized
ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
pcib0 pcibus 0 on motherboard
pir0: <pci 6="" interrupt="" routing="" table:="" entries="">on motherboard
pci0: <pci bus="">on pcib0
$PIR: No matching entry for 0.14.INTA
$PIR: No matching entry for 0.15.INTA
$PIR: No matching entry for 0.15.INTB
agp0: <intel 82443bx="" (440="" bx)="" host="" to="" pci="" bridge="">on hostb0
pcib1: <pcibios pci-pci="" bridge="">at device 1.0 on pci0
pci1: <pci bus="">on pcib1
pcib2: <pci-pci bridge="">at device 0.0 on pci1
pci2: <pci bus="">on pcib2
$PIR: No matching entry for 1.0.INTB
dc0: <intel 10="" 21143="" 100basetx="">port 0xa080-0xa0ff mem 0xd0000400-0xd00007ff irq
10 at device 4.0 on pci2
miibus0: <mii bus="">on dc0
dcphy0: <intel 21143="" nway="" media="" interface="">PHY 31 on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: <intel 10="" 21143="" 100basetx="">port 0xa000-0xa07f mem 0xd0000000-0xd00003ff irq
6 at device 5.0 on pci2
miibus1: <mii bus="">on dc1
dcphy1: <intel 21143="" nway="" media="" interface="">PHY 31 on miibus1
dcphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <pci-pci bridge="">at device 6.0 on pci2
pci3: <pci bus="">on pcib3
$PIR: No matching entry for 1.0.INTC
$PIR: No matching entry for 1.0.INTD
$PIR: No matching entry for 1.0.INTB
dc2: <intel 10="" 21143="" 100basetx="">port 0x8180-0x81ff mem 0xc0000c00-0xc0000fff irq
12 at device 4.0 on pci3
miibus2: <mii bus="">on dc2
bmtphy0: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus2
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: <intel 10="" 21143="" 100basetx="">port 0x8100-0x817f mem 0xc0000800-0xc0000bff irq
6 at device 5.0 on pci3
dc3: Using station address of dc2 as base
miibus3: <mii bus="">on dc3
bmtphy1: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus3
bmtphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc4: <intel 10="" 21143="" 100basetx="">port 0x8080-0x80ff mem 0xc0000400-0xc00007ff irq
10 at device 6.0 on pci3
dc4: Using station address of dc2 as base
miibus4: <mii bus="">on dc4
bmtphy2: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus4
bmtphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc5: <intel 10="" 21143="" 100basetx="">port 0x8000-0x807f mem 0xc0000000-0xc00003ff irq
11 at device 7.0 on pci3
dc5: Using station address of dc2 as base
miibus5: <mii bus="">on dc5
bmtphy3: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus5
bmtphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib4: <pci-pci bridge="">at device 7.0 on pci2
pci4: <pci bus="">on pcib4
$PIR: No matching entry for 1.0.INTD
$PIR: No matching entry for 1.0.INTB
$PIR: No matching entry for 1.0.INTC
dc6: <intel 10="" 21143="" 100basetx="">port 0x6180-0x61ff mem 0xb0000c00-0xb0000fff irq
6 at device 4.0 on pci4
miibus6: <mii bus="">on dc6
bmtphy4: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus6
bmtphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc7: <intel 10="" 21143="" 100basetx="">port 0x6100-0x617f mem 0xb0000800-0xb0000bff irq
10 at device 5.0 on pci4
dc7: Using station address of dc6 as base
miibus7: <mii bus="">on dc7
bmtphy5: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus7
bmtphy5:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc8: <intel 10="" 21143="" 100basetx="">port 0x6080-0x60ff mem 0xb0000400-0xb00007ff irq
11 at device 6.0 on pci4
dc8: Using station address of dc6 as base
miibus8: <mii bus="">on dc8
bmtphy6: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus8
bmtphy6:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc9: <intel 10="" 21143="" 100basetx="">port 0x6000-0x607f mem 0xb0000000-0xb00003ff irq
12 at device 7.0 on pci4
dc9: Using station address of dc6 as base
miibus9: <mii bus="">on dc9
bmtphy7: <bcm5221 10="" 100="" media="" interface="">PHY 1 on miibus9
bmtphy7:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <pci-isa bridge="">at device 7.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel piix4="" udma33="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0x1100-0x110f at device 7.1 on pci0
ata0: <ata channel="">at channel 0 on atapci0
ata1: <ata channel="">at channel 1 on atapci0
uhci0: <intel 82371ab="" eb="" (piix4)="" usb="" controller="">port 0x1200-0x121f irq 11 at de
vice 7.2 on pci0
usbus0 on uhci0
piix0: <piix timecounter="">port 0x1400-0x140f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
dc10: <intel 10="" 21143="" 100basetx="">port 0xe080-0xe0ff mem 0xf0000400-0xf00007ff ir
q 10 at device 13.0 on pci0
miibus10: <mii bus="">on dc10
dcphy2: <intel 21143="" nway="" media="" interface="">PHY 31 on miibus10
dcphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc11: <intel 10="" 21143="" 100basetx="">port 0xe000-0xe07f mem 0xf0000000-0xf00003ff ir
q 11 at device 14.0 on pci0
miibus11: <mii bus="">on dc11
dcphy3: <intel 21143="" nway="" media="" interface="">PHY 31 on miibus11
dcphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <ti1225 pci-cardbus="" bridge="">irq 12 at device 15.0 on pci0
cardbus0: <cardbus bus="">on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <ti1225 pci-cardbus="" bridge="">irq 6 at device 15.1 on pci0
cardbus1: <cardbus bus="">on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cpu0 on motherboard
smist0: <speedstep smi="">on cpu0
device_attach: smist0 attach returned 6
pmtimer0 on isa0
unknown: <pnp0c01>can't assign resources (memory)
unknown: <pnp0c02>can't assign resources (port)
attimer0: <at timer="">at port 0x40-0x5f irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <at realtime="" clock="">at port 0x70-0x7f irq 8 pnpid PNP0b00 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 irq 1 pnpid PNP0303 on
isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
unknown: <pnp0f13>can't assign resources (irq)
ppc1: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501
on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
ppc0: parallel port not found.
unknown: <pnp0c01>can't assign resources (memory)
unknown: <pnp0c02>can't assign resources (port)
unknown: <pnp0f13>can't assign resources (irq)
ppc1: parallel port not found.
smist0: <speedstep smi="">on cpu0
device_attach: smist0 attach returned 6
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
random: unblocking device.
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <transcend 20070831="">ATA-0 device
ada0: Serial Number 0 001025F5
ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes)
ada0: 1911MB (3915072 512 byte sectors: 16H 63S/T 3884C)
ada0: Previously was known as ad0
uhub0: 2 ports with 2 removable, self powered
Timecounter "TSC" frequency 721093703 Hz quality 800
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3e bd 3b 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Retrying command

(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3e bd 3b 40 00 00 00 00 01 00
(ada0:ata0:0:0:0): CAM status: Command timeout
(ada0:ata0:0:0:0): Retrying command

boot stops here…</transcend></intel></intel></speedstep></pnp0f13></pnp0c02></pnp0c01></pnp0f13></at></keyboard></at></at></pnp0c02></pnp0c01></speedstep></cardbus></ti1225></cardbus></ti1225></intel></mii></intel></intel></mii></intel></piix></intel></ata></ata></intel></isa></pci-isa></bcm5221></mii></intel></bcm5221></mii></intel></bcm5221></mii></intel></bcm5221></mii></intel></pci></pci-pci></bcm5221></mii></intel></bcm5221></mii></intel></bcm5221></mii></intel></bcm5221></mii></intel></pci></pci-pci></intel></mii></intel></intel></mii></intel></pci></pci-pci></pci></pcibios></intel></pci></pci></software></software,></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pa<br>

]]>https://forum.netgate.com/topic/80429/nokia-ip530-fail-to-upgrade-to-2-2-from-2-1-5RSS for NodeMon, 20 Apr 2026 10:04:22 GMTThu, 26 Feb 2015 15:55:47 GMT60<![CDATA[Reply to NOKIA IP530 fail to upgrade to 2.2 from 2.1.5 on Mon, 02 Mar 2015 17:59:58 GMT]]>Unlikely, it's only older hardware that now requires this workaround. It's pretty easy to do though now you know about it.  :)

Steve

]]>https://forum.netgate.com/post/524318https://forum.netgate.com/post/524318Mon, 02 Mar 2015 17:59:58 GMT<![CDATA[Reply to NOKIA IP530 fail to upgrade to 2.2 from 2.1.5 on Mon, 02 Mar 2015 15:57:08 GMT]]>It works now!

I hope this fix will be added to next releases of PFsense..

Best regards
Alberto

]]>https://forum.netgate.com/post/524267https://forum.netgate.com/post/524267Mon, 02 Mar 2015 15:57:08 GMT<![CDATA[Reply to NOKIA IP530 fail to upgrade to 2.2 from 2.1.5 on Fri, 27 Feb 2015 00:01:37 GMT]]>Try doing this:
https://forum.pfsense.org/index.php?topic=20095.msg480824#msg480824

Steve

]]>https://forum.netgate.com/post/523360https://forum.netgate.com/post/523360Fri, 27 Feb 2015 00:01:37 GMT