<![CDATA[Captive portal nothing after successfulled login]]>i have pfsense and i want to use is as a gateway for my network and from our main router inside our network i have enable the captive portal and set my cisco router DGW to my pfsense and set DNS server to add the the pfsense IP address. when i tried to open portal page shows up but after entering the username and password it doesnt re direct instead it goes to portal page again.. how can i get it to redirect the page to the internet?

thanks for the help

my Setup:

(microsoft server (DNS & DHCP) 192.168.1.50
                      |
                      |Lan||–------192.168.1.51{router(cisco 2900)}--------192.168.1.52[pfsense(captive portal)]–-Internet212.x.x.x
Users/Computers                  |
192.168.1.0

when i change client default gateway 1.51 to 1.52  CP redirect and everythings ok.

Can you help me? Thanks.

]]>https://forum.netgate.com/topic/80442/captive-portal-nothing-after-successfulled-loginRSS for NodeMon, 15 Jun 2026 21:29:06 GMTThu, 26 Feb 2015 20:17:34 GMT60<![CDATA[Reply to Captive portal nothing after successfulled login on Fri, 27 Feb 2015 19:06:09 GMT]]>Dont do this. U will get asymetric routing problems.

]]>https://forum.netgate.com/post/523544https://forum.netgate.com/post/523544Fri, 27 Feb 2015 19:06:09 GMT<![CDATA[Reply to Captive portal nothing after successfulled login on Fri, 27 Feb 2015 14:59:03 GMT]]>You've pretty much answered it. The pfSense is your gateway out to the internet so it ought to be set as your default gateway. If you set your gateway to the Cisco - which you seem to be using as switch - your traffic won't know where to go. Just leave the gateway address at '192.168.1.52' and you're set.

]]>https://forum.netgate.com/post/523496https://forum.netgate.com/post/523496Fri, 27 Feb 2015 14:59:03 GMT