Question regarding setup and installation
-
I am not sure if I am in the right area or not but wanted to get an idea of how i could use pfsense. I have a network setup for our church and they are wanting to open wireless up to guests/members. My current setup was inherited and done with layer2 switches. I am converting over to using a Cisco 2800 series router along with some Cisco Layer3 gigabit switches. The Wifi AP's we use are the Unifi UAP-Pro's which will do bandwidth limiting but I want to filter out video streaming and what not as well for guests/members. This is why I started looking at doing a transparent proxy with squid, dansguardian/squidguard and pfsense. From what I have read pfsense is setup using 2 NICs, one for LAN and one for WAN. Below is my setup or at least will be:
Cisco 2800 router - 1 public static IP from Time Warner
- 192.168.0.1/24 (internal network)Wifi SSIDs
- Private SSID using 192.168.0.1/24 - This is for Pastors and people who work at the church. I don't plan on filtering there traffic, I want to leave it wide open
- Public SSID using 172.16.0.1/23 - Would like to filter this traffic so that they can't do video streaming (Netflix, Youtube, etc) and possibly audio streaming as well.Server running ESXI 5.5 - 2 Quad Core processors - 72gig ram
- Domain Controller VM
- Pfsense VM - (not setup yet but planned on installing if it works out that way)
- Debian Linux VM - Wifi Controller runs hereOnce I switch over to the Layer3 switches I will be able to associate and configure VLAN tagging on the AP's for the Public and Private SSID's. Does anyone have any ideas on how I can get this setup?
Thanks in Advance