3COM Baseline Switch 2928 SFP Plus 3CRBSG2893
-
I just picked up a switch from Ebay but I am unable to access the WebGui…
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03941555-2.pdf
I have read the manual and still no luck, also this switch does not have a reset button.
Any ideas? I have also checked the ARP tables and I don't see the switch in the list..
I have it set up as follow
ISP Modem-pfsense-Switch-Router
I have tired to direct link into the switch and using my wifi. Everything is working on the switch but I am unable to configure anything.
-
I already just sent you a PM telling you how to locate the IP address of the switch and get to the GUI.
If there are some really strange settings running in the switch and some weird password you don't know, there is also a serial console method to factory reset.
https://www.vmadmin.co.uk/networking/81-hp-3com/358-reset-3com-switch-to-factory-defaults-forgot-password
I suspect you just have not located the IP properly. The seller should have reset to factory and cleared passwords.
-
I am going to attempt to do the reset, I sent you the msg and then made the post..
-
I am still unable to reset or access the webGUI for this switch. Does anyone have any knowledge on this switch?
-
I am still unable to reset or access the webGUI for this switch. Does anyone have any knowledge on this switch?
Nvm I was able to access the master reset with this cable only.
http://www.amazon.com/gp/aw/d/B000GL3MOY/ref=pd_aw_fbt__e_img_2?refRID=117AN4KDZY3C82R2APXV
-
I am still unable to reset or access the webGUI for this switch. Does anyone have any knowledge on this switch?
HP 2900 Baseline Switch - Default console access disabled following password change