Pfsense 2.1.5 dont get ip from pfsense 2.2
-
I do not know if it's the appropriate forum
If not
Then move or delete The messagei have a computer with pfsense 2.1.5 working
and it work finei add another computer with pfsense 2.2
and connect the first computer wan2 to the new computer lan
But he did not get an ip
What am I forgetting to do ??????
I plugged another computer to the new pfsense 2.2
and it work fine (get an ip and Internet Access)![home.plex - Interfaces WAN2 - 2015-04-07_18.10.41.png](/public/imported_attachments/1/home.plex - Interfaces WAN2 - 2015-04-07_18.10.41.png)
![home.plex - Interfaces WAN2 - 2015-04-07_18.10.41.png_thumb](/public/imported_attachments/1/home.plex - Interfaces WAN2 - 2015-04-07_18.10.41.png_thumb)
![Screenshot from 2015-04-07 18:14:43.png](/public/imported_attachments/1/Screenshot from 2015-04-07 18:14:43.png)
![Screenshot from 2015-04-07 18:14:43.png_thumb](/public/imported_attachments/1/Screenshot from 2015-04-07 18:14:43.png_thumb) -
No carrier -> not a DHCP problem. Check your cables, switches, NICs or whatever.
-
i just shut down the both computers
I took out the cards and connected again
and sprayed them contact sprayrestarted the computers
i plug a modem to wan2 on the 2.1.5 computer and it work
i plug a computer to lan on 2.2 computer and it work
i Check the cable and its good
But I noticed that LEDs on the cards do not blink (only when connecting 2.1.5 to 2.2)
when i test it with the modem and computer they blinked -
I frankly have no idea what WAN/LAN/modem/computer you are talking about or what's your computer doing on WAN. No carrier -> HW problem. No LEDs on NIC -> HW problem.
-
Something a little strange
I do not know why I thought to try it
But
Instead of connecting 2.1.5 to 2.2 Directly
I connected the two of them to a switchand it work
Why it does not work without a switch ?
-
Yes again, HW problem. Most likely not using crossover cable on LAN cards not capable of auto MDI/MDI-X detection.
-
I will list a little more
i have a computer with pfsense 2.1.5 and Three network card
WAN1
LAN
WAN2WAN1 is connected to internet with pppoe
and LAN is my networki have another network (my sister) with anoter ISP
a computer with pfsense 2.2 two network card
WAN
LANi try to connect pfsense 2.1.5 WAN2 to pfsense 2.2 LAN
with a cable and it didnt workyou said it can be HW problam
so i Checked the cable and network card on both computersanother Check
i plug a modem to pfsense 2.1.5 WAN2 and it workedand i plug a computer to pfsense 2.2 LAN and it worked
-
Cables straight
I have a cable testing deviceI do not have a crossover cable
I will bring and check