<![CDATA[Match rule with dest IP and a !port?]]>Is there a way to define a match rule to have a destination IP and a not port (!80)?  Seems the GUI's "not" checkbox applies to the destination IP and doesn't apply to the port number, or perhaps it applies to both.  Is the only way a 2nd similar rule with a dest any, port 80, and "not" checked, located below the primary rule?

]]>https://forum.netgate.com/topic/82520/match-rule-with-dest-ip-and-a-portRSS for NodeSun, 07 Jun 2026 11:35:01 GMTWed, 08 Apr 2015 18:16:52 GMT60<![CDATA[Reply to Match rule with dest IP and a !port? on Fri, 17 Apr 2015 14:10:53 GMT]]>Thanks Deric. Your "1:79, 81:65535" suggestion is what I was looking for.

]]>https://forum.netgate.com/post/537385https://forum.netgate.com/post/537385Fri, 17 Apr 2015 14:10:53 GMT<![CDATA[Reply to Match rule with dest IP and a !port? on Wed, 08 Apr 2015 18:31:01 GMT]]>I think this has come up before and no.  Make a port alias not_80 with ranges 1-79 and 81-65535.

Or you could do what you want to do with port 80 in a rule above what you want to do with everything else.  Just use any port in the second rule)

]]>https://forum.netgate.com/post/534777https://forum.netgate.com/post/534777Wed, 08 Apr 2015 18:31:01 GMT