Cannot access Status -> Queues anymore
-
I've been running pfSense 1.2 embedded on a 256MB CF card for a while without any issues. Today when I tried to go to Status -> Queues, it just hangs and I'm never able to get to the screen. In addition, the RRD Graphs for the Queues are blank, and I'm getting the following error in /var/log/lighttpd.error.log:
2008-04-06 21:43:25: (server.c.1253) NOTE: a request for /status_queues.php timed out after writing 10329 bytes. We waited 360 seconds. If this a problem increase server.max-write-idle
I've tried rebooting, deleting the Shaper rules, re-configuring the shaper rules, etc. Does anyone have any ideas what the problem may be and how I can fix it without re-installing?
Thanks in advance.
Ryan
-
someone with more experience will help soon, but IMHO, how about to check your free space?
-
Thanks for the tip. Here is my space:
pfsense:~# df -k
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ufs/pfSense 208599 59434 132478 31% /
devfs 1 1 0 100% /dev
/dev/md0 39406 1384 34870 4% /tmp
/dev/md1 19566 5904 12098 33% /var
/dev/ufs/pfSenseCfg 3671 916 2462 27% /cf
devfs 1 1 0 100% /var/dhcpd/dev
pfsense:~#This is a 256MB CF card, and has been running for about 2 weeks. Best I can tell, the traffic shaper still works, I just can't access that php page anymore.
Ryan
-
Hey yes I've got the same problem, the status_queues.php can't be shown.
It just shows loading for long time then timeout.
Mine box is PfSense 1.2-RELEASE on P4 2.8Ghz, 1G RAM, 40G HD
Had been running for 2 days, thus I am sure there are pretty much of space
Is there any module/package should installed first?
Thanks!
-
And the status queues page can only be accessed while traffic shaper is disabled. ;D
Even tried to turn on the traffic shaper but without any option enabled, the status of queues cant be shown.
Anyone give me a hint, please?
-
What browser on what os are you using?
-
In my case, it's finally works by doing the following.
Setup Traffic Shaper by the wizard, then goto Firewall: Shaper: Queues to setup the bandwidth for each queue. For example, given smaller maximum bandwidth to P2P traffic, then the Status: Traffic shaper: Queues can be load without problem.
Thanks hoba! I know I have been asked many dump questions but your help is most appreciated!
Aldo