<![CDATA[Publish Exchange 2013 With squid3]]>Hi
i am trying to setup a reverse proxy to my exchange 2013 i am using PF 2.2.1 and squid 3.4.10_2 pkg 0.2.7

Reverse Proxy interface = Wan (Pool off 8 IP Address)
User-defined reverse-proxy = none
external FQDN = autodiscover.mime-time.com
Enable HTTP reverse mode = default port 80
Enable HTTPS reverse proxy = default port 443
And I exported my exchange certificate and the CA
Ignore internal Certificate validation = checked

OWA Reverse proxy General Settings
Enable OWA reverse proxy = checked
Enable ActiveSync = checked
Enable Outlook Anywhere = checked
Enable MAPI HTTP = un checked
Enable Exchange WebServices = checked
Enable AutoDiscover = checked
I have created a NAT roll to my exchange server
when i atemte to access OWA i

When I attempt to access OWA I am blocked by the firewall default deny on wan interface
So what am I missing
Thanks Daniel

]]>https://forum.netgate.com/topic/82552/publish-exchange-2013-with-squid3RSS for NodeSat, 18 Apr 2026 00:49:04 GMTThu, 09 Apr 2015 08:32:25 GMT60<![CDATA[Reply to Publish Exchange 2013 With squid3 on Sat, 16 May 2015 09:37:38 GMT]]>OK I am Lost
And if you take a look on this settings you will see that you are not using the reverse proxy
As it turns out the Nat rolls negates the Proxy settings
the reasen for that is the way the Nat is configured
Or am I missing something
http://www.moh10ly.com/blog/pfsense/publishing-exchange-on-pfsense
Thanks Daniel

Nat01.PNG
Nat01.PNG_thumb

]]>https://forum.netgate.com/post/544583https://forum.netgate.com/post/544583Sat, 16 May 2015 09:37:38 GMT<![CDATA[Reply to Publish Exchange 2013 With squid3 on Tue, 12 May 2015 03:38:48 GMT]]>Any One !!

]]>https://forum.netgate.com/post/543581https://forum.netgate.com/post/543581Tue, 12 May 2015 03:38:48 GMT