SIPROXD Transparent Proxy
Any idea how to make SIPROXD a transparent proxy?
I believe it already is.
It doesn't seem to be working transparently since I am still getting one-way audio. I believe the issue is that the port 5060 packets aren't being redirected to the SIPROXD app but my BSD knowledge is too limited to know how to check my hypothesis.
I can second that. SIPROXD is not working as transparent proxy out of the box, because therefor all traffic on port 5060 needs to be routed through SIPROXD, and that's not the case. To use SIPROXD, you need to define it as the SIP outbound-proxy (means address of LAN interface at port 5060) in the used VoIP application.
I was playing around with it all day, because asterisk does not support setting a SIP outbound proxy, that's why it will only work, if SIPROXD is used as a transparent proxy.
To make it work, all outgoing SIP traffic needs to be redirected to SIPROXD, as seen here with the example for iptables:
iptables -t nat -A PREROUTING -m udp -p udp -i eth0 –destination-port 5060 -j REDIRECT
But whatever I tried, I could not replicate that rule by setting up a NAT Port Forward.
Is this functionality just not working on pfSense?
This is weird:
SIPROXD is listening on LAN (em0) 192.168.1.1:5060, so the only possible redirection rule looks like this:
rdr on em0 inet proto udp from any to any port = 5060 -> 192.168.1.1 port 5060
Is this supposed to work?
How about letting SIPPROXD listen on LAN (em0) 192.168.1.1:5061, and redirect this way:
rdr on em0 inet proto udp from any to any port = 5060 -> 192.168.1.1 port 5061
Does this make a difference? I don't think so, because AFAIK a NAT rule on the same interface just doesn't work that way (which is supposed to be possible with iptables just due to that 'trick' with PREROUTING).
Looks like the only logical way to handle such a transparent proxy, is to let SIPPROXD listen on lo0 127.0.0.1:5060, and do the redirecting as:
rdr on em0 inet proto udp from any to any port = 5060 -> 127.0.0.1 port 5060
The problem is, lo0 can not be choosen as the inbound interface in the SIPROXD GUI menu, and establishing a pure rdr seems also not to be possible using the NAT Port Forward GUI, because when I enter a port forward which creates the needed rdr rule, it also produces the following nat rule:
nat on em0 inet proto tcp from 192.168.1.0/24 to 127.0.0.1 port = 5060 -> 192.168.1.1 rdr on em0 inet proto udp from any to any port = 5060 -> 127.0.0.1
So if this way is the only one supposed to work:
1. How do I set lo0 (127.0.0.1) as the inbound interface for SIPROXD?
2. How do I generate the needed rde rule without the nat part?
I can confirm now that a rdr to 192.168.1.1 (the LAN interface address) is not working.
So what's the solution then??? Nobody any idea?
Is nobody here using SIPROXD?
SIPROXD in transparent mode is even included in m0n0wall 1.3b now, so all the other projects have it up and running, except pfSense? Can't believe that!
Come on guys, does really nobody have a clue? This is a general issue, applying to all creation of a transparent proxy service, and I know it can be solved somehow (just the "how" is still missing).
As the option for SIPROXD in transparent mode is just a click away in Endian Firewall and m0n0wall 1.3b, this is a missing feature in the pfSense SIPROXD package!
This is proably a simplistic answer, but isn't squid a transparent proxy?
If so you might be able to look at the squid code to see how it was implemented.
dotdash last edited by
Also, if it works on m0n0, one could compare the pfSense package with the m0n0wall version. Although the issue could be that m0n0 is doing something with ipfilter that is harder to do in pf.
I just got mine working. Here's a link to my post: