Multi VLAN over LAN possible?
-
I have pfsense running and working well for some time. I am now looking to set up a multi vlan network to separate the servers and other equipment from general home network. I purchase a TL-SG2424 L2 switch. However, I am having difficulties getting the whole setup to work.
The topology of the configuration is
Internet –> pfsense box --> TL-SG2424 switch
I am thinking to for instance put port 1-8 as VLAN10 for servers, port 24 as the uplink to pfsense, port 23 to another POE switch for security cameras that I'd like to put on a VLAN20. Then another port as guest wifi AP VLAN99. Rest can be general LAN use.
Right now, pfsense is set to give out ip in 192.168.10.0/24 subnet. I created the VLAN10 as a start and set it to the 10.1.10.0/24 subnet. I also created NAT rule to allow outgoing traffic. However, after configuring the VLAN on the switch, I just can't seem to DHCP for an IP on port 1-8 no matter what I tried to change.
At this point, I don't think it has to do with config on the switch, but it is still a possibility. I do however want to make sure my pfsense config is set correctly and complete.
Need some help :-\
-
Here are the screenshot of the settings.
-
Creating the VLAN is not enough.
You need to go to Interfaces > (assign) and assign OPT1 to VLAN 10 on igb1 if you want the OPT1 interface to hit your switch tagged with VLAN 10.