Slow WAN troughput
-
Hi,
I getting slow connection behind pfsense. My first ISP speed was 10Mbps down/10Mbps up and my second IS was 10Mbps down / 1 Mbps up. Without firewall the speed is ok but behind firewall I get 2Mbps down on both ISP. I disabled squid and squidguard but same result. No any Speed Limiter or QoS. I setup my pfsense as failover. I'm using pfsense 2.2.2 x64
I have any misconfiguration?
Do I need to tune up anything?
Just ask if you need more detailsPlease help me.
Thank you.
Here is my network
1st and 2nd ISP –-> PFsense ---> Laptop
My PFsense Server
ASUS B85 Pro Motherboard
Intel cire i3 (4 core)
2 x 4 GB Kingston
500GB HD Seagate
3 Intel Pro/1000 MT Dual Port Server AdapterHere is some screenshots of my config
-
Have to used iperf or anything to speed test to/through your firewall? What does you your firewall load look like when you're attempting to transfer data?
-
194ms pings on a 10M pipe?
-
194ms pings on a 10M pipe?
Yes that also my concern..
Have to used iperf or anything to speed test to/through your firewall? What does you your firewall load look like when you're attempting to transfer data?
I cannot test iperf yet because I don't have iperf server to test. CPU load in heavy use 0.3% and mem use 90 Mb
FYI i'm using Intel Pro/1000 MT Dual Port Server Adapter, is there any issue using dual port nic?
Thanks,
-
Well, I now see you're pinging 8.8.8.8. Guess it's far from you. Maybe try using something closer.