Multi wan loadbalancing with squid proxy on pfsense 2.2.2
-
hello all
i configure two pfsense device with below config and load balancing with squid works well!!!!em0–----------> em2 em0 ppoe ---------------->(wan1)
pfsense@ pfsense#
em1------------> em3 em1 ppoe ---------------> (wan2)Device settings
pfsense@:
8.8.8.8 ----> gw (em0)
General Setup ---> dns server
8.8.8.8 ----> gw (em1)advance ---->Miscellaneous ---> Allow default gateway switching enabled
routing: em0 and em1 ---> multi wan groups with tier 1
floating rul:
action---> pass , interface --> em0 , em1 Direction---> out protocol--->any source and destination ---->any Gateway ---> multi wan groupssquid:
Squid General Settings---> Transparent HTTP proxy on LAN enabled
Custom Settings --> Integrations ---> tcp_outgoing_address 127.0.0.1pfsense#:
firewall rules
em2: any to any allowed with gateway wan1 and em3: any to any allowed with gateway wan2
but by using two modem for connection ppoe instead pfsense# the load balancing not works !!!!!!
so that http pages are randomly opens with ip defualt gatewayem0------------> modem1 ppoe (wan1)
pfsense@
em1------------> modem2 ppoe (wan2)If someone can help me!!! thanks
-
Dear all;
can any one help me how to config and used transparent proxy with load balancing 2 wan :-[
thanks