PfSense LAGG to Cisco Nexus Port Channel
-
Trying to connect a pfSense firewall to a Cisco Nexus switch with two 10Gb connections. I am using Dell Servers with Chelsio nics. On the pfSense side I have LAGG0 configured to use LACP and assigned to the WAN interface. The two interfaces in LAGG0 are cxl0 and cxl1. On the Cisco Nexus side I have a Port-Channel configured to use LACP mode Active. cxl0 is connect to Eth1/3 on the Cisco side which is in the port channel. On the pfsense side when I do an ifconfig I can see that cxl0 is UP and Active. On the Cisco side I see that Eth1/3 is bundled in the Port Channel but is down with a status of Hot standby in bundle. Anyone have any experience with using pfSense LAGG with Cisco Etherchannel?
Thanks in Advance!