Cant get to work pfsense on SuperMicro SYS-5018A-MLTN4
-
SuperMicro SYS-5018A-MLTN4
http://www.supermicro.com/products/system/1u/5018/sys-5018a-mltn4.cfm
after installing pfsense 2.2.4 it self-rebooted again and again without msg.
ipcop etc on this server work carefuly -
Where did you installed the pfSense 2.2.4?
On a SSD or mSATA?And from where did you install the pfSense?
From an USB Stick or CD?If you have a SSD/mSATA was the BIOS on AHCI mode?
Did you try out full install of the pfSense?
Did you change after the installation process the boot order in the BIOS? -
@BlueKobold:
Where did you installed the pfSense 2.2.4?
On a SSD or mSATA?SATA2 HDD
@BlueKobold:
And from where did you install the pfSense?
From an USB Stick or CD?from USB CD
@BlueKobold:
If you have a SSD/mSATA was the BIOS on AHCI mode?
Yes
@BlueKobold:
Did you try out full install of the pfSense?
full installation successful
@BlueKobold:
Did you change after the installation process the boot order in the BIOS?
Yes, boot from hdd
-
But you was not trying out the yellow SATA port, or?
I would try it out once more again with a SSD or USB Memstick NanoBSD.