Setting up a new sg-2440 and port forwarding isn't working
-
I've setup several pfsenses in the past and I swear I've done everything right.
Port forward page:
WAN TCP/UDP * * WAN address 443 (HTTPS) 192.168.2.2 443 (HTTPS) OWA
move selected rules before this rule edit rule
delete add
change WAN TCP/UDP * * WAN address 2016 192.168.2.5 3389 (MS RDP) RDP to TS SERVER
move selected rules before this rule edit rule
delete add
change WAN TCP * * WAN address 2015 192.168.2.2 3389 (MS RDP) RDP for SERVERRules page for WAN adapter:
- RFC 1918 networks * * * * * Block private networks
edit edit
add
block * Reserved/not assigned by IANA * * * * * * Block bogon networks
move edit
add
icon IPv4 TCP/UDP * * 192.168.2.2 3389 (MS RDP) * none NAT RDP for SERVER
move selected rules before this rule edit
delete add
icon IPv4 TCP/UDP * * 192.168.2.5 3389 (MS RDP) * none NAT RDP to TS SERVER
move selected rules before this rule edit
delete add
icon IPv4 TCP/UDP * * 192.168.2.2 443 (HTTPS) * none NAT OWA
move selected rules before this rule edit
delete add
icon IPv4 ICMP * * * * * none Allow pings
Rules page for LAN adapter:
-
-
- LAN Address 443
80 * * Anti-Lockout Rule
move edit
add
icon IPv4 * LAN net * * * * none Default allow LAN to any rule
move selected rules before this rule edit
delete add
icon IPv6 * LAN net * * * * none Default allow LAN IPv6 to any rule
- LAN Address 443
-
I'm trying to forward RDP from port 2016 publicly to port 3389 default internally. Same with another PC and port 2015
Anything else I could be missing? It goes dsl modem -> pfsense box ->switch -> computers. I'm trying to RDP in from one of my outside servers which I'm also rdp'd into. This was working on our previous router, but now it is not.
- RFC 1918 networks * * * * * Block private networks
-
…......................................