<![CDATA[WAN has X and apinger won't start]]>This router has been up and going for years. Recently I noticed I no longer could access it from the WAN side so I logged on local and see this:

Restart makes no difference. WAN is an Intel Pro 1000 NIC using em0 driver:

My only guess is that the WAN NIC is dead? I have no other ideas.

Thanks.
1.jpg
1.jpg_thumb
2.jpg
2.jpg_thumb
3.jpg
3.jpg_thumb

]]>https://forum.netgate.com/topic/91076/wan-has-x-and-apinger-won-t-startRSS for NodeSun, 11 Oct 2026 21:23:54 GMTSun, 01 Nov 2015 00:35:30 GMT60<![CDATA[Reply to WAN has X and apinger won't start on Sun, 01 Nov 2015 22:39:14 GMT]]>Yeah I see that now. Thanks. I changed it to em0 and it complained so I changed it to WAN and lost LAN connectivity to it completely after applying. I will go by there tomorrow and restart it.

Thanks again.

]]>https://forum.netgate.com/post/580752https://forum.netgate.com/post/580752Sun, 01 Nov 2015 22:39:14 GMT<![CDATA[Reply to WAN has X and apinger won't start on Sun, 01 Nov 2015 09:39:20 GMT]]>your pppoe is stuck on a serial device instead of on em0.

goto interfaces–>assign-->PPPs-->edit PPPoE0

try to change its interface back to em0

]]>https://forum.netgate.com/post/580659https://forum.netgate.com/post/580659Sun, 01 Nov 2015 09:39:20 GMT