CoDel on VMware ESXi
-
I know that traffic shaping on a pfsense host in a vmware esxi server has been iffy in the past, especially when one NIC deals with multiple vlan's. I have pfsense setup so that my WAN is mapped to a NIC (vmxnet3) and my LAN connections (six of them) are VLAN's that are in pfsense. So, in other words, I don't have vmware doing the vlan assignments but yet pfsense.
When attempting to fix bufferbloat, an article says to set bandwidth limits with codel on the interfaces. My internet is 75/10 (really about 85/12) so I've been playing with the down limits. It seems like when adjusting and running speedtests, I either get 85 down or 50 down, and it's not consistent.
Is it because of vmware and the vlans, or something else?
-
It has been my experience that when running traffic shaping for PFSense on Vwmare , I make sure i have dedicated NIC's in the host to assign with no VLAN's. I dont use VMXNET 3 NIC's for them and use the E1000 NIC's.
I also make sure I am using Intel branded NIC's. That being said - I dont run PFSense on Vmware for my LAN parties. I tried it once and it did not go very well.
This is just my experience. YMMV.
-
I know that there were issues with the vmxnet3 drivers in older versions of pfsense, but they've now included it in the later builds. However, I do agree that while it does work, it may not be the optimal solution.
I am now wondering if vmware is the cause of my packet loss….
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy