PfBlockerNG v2.0 w/DNSBL
-
BBcan, I've read and been using most of the feeds mentioned in the first few pages of this thread. Is there an exhaustive list of feeds or any "must have" feeds that I might have missed? Thank you! 8)
I am working on the next version of pfBlockerNG v3.0 which will have a Feeds Management Tab for IPv4/v6/DNSBL feeds … plus many other features ...
Currently listing:
-
IPv4: 105 Feeds
-
IPv6: 9 Feeds
-
DNSBL: 71 Feeds
Just working on the last bits … Hope to have it out soon....
I will post some screenshots when I can...Awesome! Can't wait for it's release! Thank you for your continued contribution, pfBlockerNG is already great but this is the icing on the cake!
-
-
I am working on the next version of pfBlockerNG v3.0 which will have a Feeds Management Tab for IPv4/v6/DNSBL feeds … plus many other features ...
I will post some screenshots when I can...As one of BBcan's testers, I can tell you he has done an amazing job on this feature. It alone will be worth the update.
-
Any guesstimates for ETA?
-
I'd like to report a serious bug.
After the first setup and first reboot, PFblockerNG proceeds to alter the order of the pre-existing Floating Rules.
Before PFblockerNG:1º Custom quick Allow rules to many things
2º Custom quick Deny all rule to all traffic on my subnets.
After PFblockerNG
1º PFblocker own rules
2º Custom quick Deny all rule to all traffic on my subnets.
3º Custom quick Allow rules to many things.
It changed the order of my Deny Rule to be above my Allow rules, thus blocking all traffic.
I fixed the rules ordering, but I have yet to reboot the machine to see if they are preserved.
Edit: I see there is an option on how to order pfblockerng floating rules, and the default one says:
pfb_block / Reject | all other rules
It either considered my custom Deny rule to be one of its own, or it simply parses all existing rules looking for "deny/reject" and jumps them ahead.
-
I am working on the next version of pfBlockerNG v3.0 which will have a Feeds Management Tab for IPv4/v6/DNSBL feeds … plus many other features ...
I will post some screenshots when I can...As one of BBcan's testers, I can tell you he has done an amazing job on this feature. It alone will be worth the update.
How do you become a tester? I would like to sign up if any more are needed! I always love to try bleeding edge/potentially buggy software and assist in the debugging/feedback process. Kind of why I religiously update my pfSense box daily whenever updates are available :)
-
How do you become a tester? I would like to sign up if any more are needed! I always love to try bleeding edge/potentially buggy software and assist in the debugging/feedback process. Kind of why I religiously update my pfSense box daily whenever updates are available :)
I sent a PM :)
-
How do you become a tester? I would like to sign up if any more are needed! I always love to try bleeding edge/potentially buggy software and assist in the debugging/feedback process. Kind of why I religiously update my pfSense box daily whenever updates are available :)
I sent a PM :)
I'd love to test too.. :) let me know if can include me..
-
Just got caught up on this thread. The only thing I am unclear on is what is the ramifications of having these two options enabled?
1. Register DHCP leases in the DNS Resolver
2. Register Static DHCP static mappings in the DNS ResolverThanks.
-
At every registration, Unbound reloads, so if it takes 1-3 minutes to restart (depending on you domain block list size), you have no DNS service available.
Static mappings are not dynamic, so Unbound will reload only when you save the mappings.
-
Yes, unbound reloading delay makes sense. Look like I will have to limit my DNSBL feeds since I need both features enabled.
Another question for DNSBL is do you normally Deny Both or just Deny Outbound and allow pfSense implicit block to handle the inbound. I am trying to imagine a case for Deny Both in DNSBL. For anything incoming, the session has to be initiated from inside the firewall. So for unwanted ads to come in, they have to be embedded in the response of the original request in the form of actual content and not a URL. In which case, DNSBL would not be able to block it anyway.
-
At every registration, Unbound reloads, so if it takes 1-3 minutes to restart (depending on you domain block list size), you have no DNS service available.
Static mappings are not dynamic, so Unbound will reload only when you save the mappings.
Thanks Ron. This might be added as an explanation in the screen, next to these two options.
-
Another question for DNSBL is do you normally Deny Both or just Deny Outbound and allow pfSense implicit block to handle the inbound. I am trying to imagine a case for Deny Both in DNSBL. For anything incoming, the session has to be initiated from inside the firewall. So for unwanted ads to come in, they have to be embedded in the response of the original request in the form of actual content and not a URL. In which case, DNSBL would not be able to block it anyway.
If you have open WAN ports, then you only need to protect those ports… If so, you can use the "Adv. Inbound" rule settings to add the DST IP(s) and Port(s) so the rules are effective for those events only... The default pfSense block rule on the WAN will handle all other blocking required...
IP Blocking uses the Firewall rules to block/permit/match while DNSBL is blocking based on DNS request by the LAN clients... Don't get the two mixed up :)
-
…
IP Blocking uses the Firewall rules to block/permit/match while DNSBL is blocking based on DNS request by the LAN clients... Don't get the two mixed up :)
Sorry if I sound like a newbie, but I just found out about pfBLockNG a few days ago and have been reading the forums to fully understand the package.
This is where I am confused about is if DNSBL is blocking based on DNS request by the LAN clients, why are there options in DNSBL to block incoming? I am trying to understand a scenario where I would have DNS request coming in through the WAN that I would need blocking. Or is the incoming blocking options in DNSBL is just a way to implement IP Blocking using DNSBL feeds?
I am feeling like I am missing a connection to fully understand the difference between IP blocking and DNSBL "incoming" blocking. By incoming, I am referring to requests originating from the WAN/internet.
-
-I am missing a connection to fully understand the difference between IP blocking and DNSBL "incoming" blocking. My incoming, I am referring to requests originating from the WAN/internet.
Some of the DNSBL Feeds contain IP addresses.. So when IPs are found in DNSBL, they can be added to a "DNSBL_IP" aliastable to be blocked. So the IP settings in DNSBL are just for that part. Typically IP based feeds are entered in the IPv4/6 Tabs and GeoIP.
There is also a "Permit Rule" in DNSBL which is used to allow other Vlans to be able to access the DNSBL VIP address.
Hope that makes it clearer.
-
I have the latest version to date and wondering if there is a way, or if in the future, possible to whitelist IPs from companies like Teamviewer sending email from Germany when all countries are blocked?
I understand it sounds counter productive as pfSense blocks all by default but we want pfBlockerNG blocking all international traffic as we open ports for services and don't need the N. Koreans attempting any crazy stuff. pfBlockerNG has done a marvelous in blocking unwanted international email spam which is an A+++!
-
I have the latest version to date and wondering if there is a way, or if in the future, possible to whitelist IPs from companies like Teamviewer sending email from Germany when all countries are blocked?
I understand it sounds counter productive as pfSense blocks all by default but we want pfBlockerNG blocking all international traffic as we open ports for services and don't need the N. Koreans attempting any crazy stuff. pfBlockerNG has done a marvelous in blocking unwanted international email spam which is an A+++!
To overcome an IP that is blocked by a GeoIP Alias, you can create a "Permit" Alias, and add the IPs to the customlist at the bottom of this new Alias. Then set the appropriate action such as "Permit Outbound". Then ensure that this Permit rule is above the other Block rules by setting the appropriate "Rule Order" setting in the general tab.
You can also use the "Whois" setting in the IPv4 tab to whitelist a particular ASN number. Click on the blue infoblock icons in the IPv4 tab for further details.
-
Hi
The GZ from http://list.iblocklist.com/?list=bt_spyware&fileformat=p2p&archiveformat=gz is not wokring it keeps making Download FAIL, but the link is working just fine?
-
I have the latest version to date and wondering if there is a way, or if in the future, possible to whitelist IPs from companies like Teamviewer sending email from Germany when all countries are blocked?
I understand it sounds counter productive as pfSense blocks all by default but we want pfBlockerNG blocking all international traffic as we open ports for services and don't need the N. Koreans attempting any crazy stuff. pfBlockerNG has done a marvelous in blocking unwanted international email spam which is an A+++!
To overcome an IP that is blocked by a GeoIP Alias, you can create a "Permit" Alias, and add the IPs to the customlist at the bottom of this new Alias. Then set the appropriate action such as "Permit Outbound". Then ensure that this Permit rule is above the other Block rules by setting the appropriate "Rule Order" setting in the general tab.
You can also use the "Whois" setting in the IPv4 tab to whitelist a particular ASN number. Click on the blue infoblock icons in the IPv4 tab for further details.
Are you able to share a screencap of adding a IP and/or domain? I have tried, but those sites are still getting blocked. I use WHOIS and tried the IP's and tried the domain names and tried the ASN names. I used Permit both and also change the rule order. The new rule was added to the top of the WAN rules list, but still no go. So I must be doing something wrong somewhere.
Thanks
-
Hi
The GZ from http://list.iblocklist.com/?list=bt_spyware&fileformat=p2p&archiveformat=gz is not wokring it keeps making Download FAIL, but the link is working just fine?
Check the Alerts tab and see if its being blocked?
-
Are you able to share a screencap of adding a IP and/or domain? I have tried, but those sites are still getting blocked. I use WHOIS and tried the IP's and tried the domain names and tried the ASN names. I used Permit both and also change the rule order. The new rule was added to the top of the WAN rules list, but still no go. So I must be doing something wrong somewhere.
Thanks
Typically you do not want to use "Permit Both" as pfSense is a stateful firewall by design…. So you would want the LAN to make the request outbound which creates a firewall state entry that allows the IP to return back thru on the WAN side.... So when you use "Permit Both", you are allowing those IPs to access your network without a LAN device first making the request for it.... If you have a webserver, then that would be more applicable...
For the IP whitelist, did you add the IP that you want to access to an IPv4 customlist? Did you set the Rule order option in the General Tab to put the Permit rules above the Blocked rules? Rules are processed top to bottom.
-
I am working on the next version of pfBlockerNG v3.0 which will have a Feeds Management Tab for IPv4/v6/DNSBL feeds … plus many other features ...
Currently listing:
-
IPv4: 105 Feeds
-
IPv6: 9 Feeds
-
DNSBL: 71 Feeds
Just working on the last bits … Hope to have it out soon....
I will post some screenshots when I can...Hey BBcan177, first and foremost, thanks for your work on this. It's coming up to 2 years since you launched it here, and you have remained available to chat to all levels of users!
I just wanted to see if v3 was close to launching, or if I could help out with the testing at all?
Cheers
-
-
What do you guys do for a dual stack supported pfsense, ie both IPv6 and IPv4? I can set all the IPv4 stuff up no problem, but most systems will use the IPv6 resolvers, which pretty much bypasses all of this stuff. I could modify systems to use ipv4 first, but would much rather resolve the issue on the DNSBL side.
-
Hello, sorry if this has been addressed before. 69 pages to scan through is a lot.
I am getting this strange certificate error randomly where the certificate issuer is DNSBL. So the browser is correct to issue a warning, however I am curious if this can be avoided.
A good test would be to do a google search for a product and then click the very first link in the search results. I searched for Otterbox for example, and clicked the first link. I was immediately warned of a certificate trust issue for DNSBL.
The only thing I have in DNSBL is the EasyList w/o Elements and EasyPrivacy.
I thought some sites online were telling me to install this certificate. Thats not hard on one machine, but when you have a lot of other machines, or devices, I'm not sure of an easy way to install custom certs on appliances, embedded OS's, different makes and models of android tablets and phones, iphones and ipads, etc…
-
Nevermind, fixed it with a firewall rule on the lan side as first mentioned in this post:
https://forum.pfsense.org/index.php?topic=124945.msg697380#msg697380 -
Hi,
I am wondering why the "easylist w/o elements" + "easy pricacy" is not working when I open this website to test adblock tester: http://simple-adblock.com/faq/testing-your-adblocker/. It works when I install the ABP browser extension though.
I have tried to parse easylist to be able to work with squidguard. But once squidgaurd detects it, the entire page will be affected not the only elements. Not a good idea.
I hope you can enlighten me and the rest here.
Thanks!
Regards,
xChaz -
I am wondering why the "easylist w/o elements" + "easy pricacy" is not working when I open this website to test adblock tester: http://simple-adblock.com/faq/testing-your-adblocker/. It works when I install the ABP browser extension though.
DNS based blockers work differently than Browser based blockers. The best test would be to use the pfBlockerNG log tab and view the EasyList feed and run a:
host -t A example.com
and if it replies back with the DNSBL VIP then its being blocked correctly.
-
Thanks for the reply. Its working. I want to block youtube ads. When this will be available?
-
I want to block youtube ads. When this will be available?
Blocking via DNS is difficult with Domain based blocking, as Youtube/Google mix the webpages and ADs together, so blocking ADs may also block other webpages…
There are some Youtube based Feeds but YMMV on how well it performs.
-
Blocking via DNS is difficult with Domain based blocking, as Youtube/Google mix the webpages and ADs together, so blocking ADs may also block other webpages…
Agree. It's a challenge on how to make this work without affecting the entire/other webpages. I think its time to add an unofficial 3rd party package, E2******. Well see how the content-control software do.
-
I've been trying to emulate the same configuration as this poster outlines, for the same reasons. However the rule order preference that BBCan suggests doesn't seem to be followed, with the pfB alias_permit rule ("pfB AllowEmails") getting moved under the pfb block rules when the PFB cron update occurs.
I should probably first state that I'm not using the DNSBL option.
I have the latest version to date and wondering if there is a way, or if in the future, possible to whitelist IPs from companies like Teamviewer sending email from Germany when all countries are blocked?
I understand it sounds counter productive as pfSense blocks all by default but we want pfBlockerNG blocking all international traffic as we open ports for services and don't need the N. Koreans attempting any crazy stuff. pfBlockerNG has done a marvelous in blocking unwanted international email spam which is an A+++!
To overcome an IP that is blocked by a GeoIP Alias, you can create a "Permit" Alias, and add the IPs to the customlist at the bottom of this new Alias. Then set the appropriate action such as "Permit Outbound". Then ensure that this Permit rule is above the other Block rules by setting the appropriate "Rule Order" setting in the general tab.
You can also use the "Whois" setting in the IPv4 tab to whitelist a particular ASN number. Click on the blue infoblock icons in the IPv4 tab for further details.
I've attached image of rules as I would expect them to stay, given the selected PFB rule selection (image also attached).
I've struggled with this system due to lack of concrete documentation (possibly also lack of brain power!!) and trying to peg together info from many sources, many of which conflict in the approach. I found this reddit post to be the most helpful so far: https://www.reddit.com/r/PFSENSE/comments/48iiq4/pfblockerng_exceptionswhitelist/
We host servers behind the pfSense box, so we have allow rules to forward specific service ports/virtual-IP's to those systems. We now also need to block large attack volumes from countries/continents we have no business connection to - in particular people trying to hack into email accounts (causing account lockouts) and the VoIP server (which luckily provides its own blacklisting, but at penalty of additional network load).
I have tried using the main suggestion of "allowed countries" (rather than "block the world") - but this doesn't seem to provide enough protection, as with that approach we still see connections to our internal servers from countries that we don't want/need. So the "block the world" approach and then allowing our own country (UK), plus adding some whitelisted addresses for known customer email sources (using services such as Messagelabs which use server presences across Europe) seems to be the configuration that works as we want.
I fully accept this whitelisting approach is not easy with need to keep our manual list updated - but once we get the main sources in the list it shouldn't need changing very often.
But I'm worried that the PFB rule priority setting seems to be ignored (or that the whitelist is not seen as a Pass/Match rule) - or simply I've not understood how to keep the Alias_Permit definition at the top of the rules. I can't spend time resetting the rule several times a day.
So just in the time taken to write this, the PFB cron job has occurred and the rule order changed again (attachment "Rule order after PFB cron update.png)", once again moving our whitelist rule under the block rules.
Any ideas what I am doing wrong? Could it be that using the Alias_Permit instead of "Allow Inbound" for the IPv4 custom list is the problem?
We are on pfSense version 2.3.4-p1, with PFB 2.1.1_10. We also use SNORT (just updated from 3.2.9.3 to 3.2.9.5_1) and OpenVPN.
Thanks.
EDIT I experimented with changing the IPv4 alias list setting from "Alias_Permit" to "Permit_Inbound". That then uses the PFB rule priority setting to place the whitelist at the top of the PFB "auto rules", as its now set by PFB itself. My manually added rule was still present (but again had been moved below the PFB reject rules), so I've deleted it.
While it seems I've got things working, I'd still like to know if there is any better config I can define that still matches the desired protection as described above.
![manually set allow rule.png](/public/imported_attachments/1/manually set allow rule.png)
![manually set allow rule.png_thumb](/public/imported_attachments/1/manually set allow rule.png_thumb)
![pfBlockerNG rule priority setting.png](/public/imported_attachments/1/pfBlockerNG rule priority setting.png)
![pfBlockerNG rule priority setting.png_thumb](/public/imported_attachments/1/pfBlockerNG rule priority setting.png_thumb)
![Rule order after PFB cron update.png](/public/imported_attachments/1/Rule order after PFB cron update.png)
![Rule order after PFB cron update.png_thumb](/public/imported_attachments/1/Rule order after PFB cron update.png_thumb)
![pfBlockerNG IPv4 Alias List setting changed to Allow Inbound.png](/public/imported_attachments/1/pfBlockerNG IPv4 Alias List setting changed to Allow Inbound.png)
![pfBlockerNG IPv4 Alias List setting changed to Allow Inbound.png_thumb](/public/imported_attachments/1/pfBlockerNG IPv4 Alias List setting changed to Allow Inbound.png_thumb) -
@webtyro:
@BBcan177
First I wanted to thank you for the work you have put into this and as usual no real problems. I just wanted to ask about the gif image being pushed to the browser. When I browse to the VIP address I get a 1x1 pixel image. Is this image a placecard holder that would be populated with info or should it be in a different scale. I run my browser locked down as much as possible so not having seen the image is not on my priority list. I can ping and browse to it but was wondering about the single pixel size. If this is normal unpopulated size no worries but if not where do you hide it and what size is the default.Where is this 1x1 Pixel option? I don't see it anywhere.
-
@webtyro:
@BBcan177
First I wanted to thank you for the work you have put into this and as usual no real problems. I just wanted to ask about the gif image being pushed to the browser. When I browse to the VIP address I get a 1x1 pixel image. Is this image a placecard holder that would be populated with info or should it be in a different scale. I run my browser locked down as much as possible so not having seen the image is not on my priority list. I can ping and browse to it but was wondering about the single pixel size. If this is normal unpopulated size no worries but if not where do you hide it and what size is the default.Where is this 1x1 Pixel option? I don't see it anywhere.
Some details here:
https://forum.pfsense.org/index.php?topic=120253.msg665063#msg665063With the current version its not practical since you will get this image instead of the 1x1 for blocked ADs also…
The next version has functionality to push a blocked page if the blocked page was say www.example.com... And if the blocked page was an AD, then it gets the 1x1 pixel instead...
The Blocked page is also customizable to what ever you want to add to it...
-
I set up pfBlockerNG using this guide https://www.tecmint.com/install-configure-pfblockerng-dns-black-listing-in-pfsense/. I saw it mentioned (somewhere around page 45ish) that one of the reasons why I might not be see any sort of output on the alerts or blocking in general was because I am running Squid (transparent mode, wpad, ssl filtering (splice all)) on LAN and loopback interfaces. Do I need to adjust Squid to also filter on WAN interface as well to get these two packages to play with one another or is it something else entirely?
I'm able to browse and ping the VIP address with no problems. I attempted to ping and nslookup something off of the yoyo list which I have added on my feeds and both went through okay.
-
I have new hardware with a new installation.
I restore de backup file.
But on the new installation pfblockerNG geoIP is missing.>>> Installing pfSense-pkg-pfBlockerNG... Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. Checking integrity... done (0 conflicting) The following 9 package(s) will be affected (of 0 checked): New packages to be INSTALLED: pfSense-pkg-pfBlockerNG: 2.1.2_1 [pfSense] lighttpd: 1.4.45_1 [pfSense] lua52: 5.2.4 [pfSense] whois: 5.2.17 [pfSense] GeoIP: 1.6.11 [pfSense] grepcidr: 2.0 [pfSense] aggregate: 1.6_1 [pfSense] pecl-intl: 3.0.0_10 [pfSense] icu: 59.1,1 [pfSense] Number of packages to be installed: 9 The process will require 47 MiB more space. [1/9] Installing lua52-5.2.4... [1/9] Extracting lua52-5.2.4: ......... done [2/9] Installing icu-59.1,1... [2/9] Extracting icu-59.1,1: .......... done [3/9] Installing lighttpd-1.4.45_1... [3/9] Extracting lighttpd-1.4.45_1: .......... done [4/9] Installing whois-5.2.17... [4/9] Extracting whois-5.2.17: .......... done [5/9] Installing GeoIP-1.6.11... [5/9] Extracting GeoIP-1.6.11: .......... done [6/9] Installing grepcidr-2.0... [6/9] Extracting grepcidr-2.0: ..... done [7/9] Installing aggregate-1.6_1... [7/9] Extracting aggregate-1.6_1: .... done [8/9] Installing pecl-intl-3.0.0_10... [8/9] Extracting pecl-intl-3.0.0_10: .......... done [9/9] Installing pfSense-pkg-pfBlockerNG-2.1.2_1... [9/9] Extracting pfSense-pkg-pfBlockerNG-2.1.2_1: .......... done Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()... Downloading MaxMind GeoIP databases. This may take a minute... GeoIP.dat... cURL Error: 60. cURL Error: 60. cURL Error: 60. Failed! MaxMind download Failed! Fetching MaxMind archive from pfSense package repo... /tmp/countrycodes.tar.bz2 0 B 0 Bps Fetch done. Converting MaxMind GeoIP databases for pfBlockerNG. This may take a few minutes... Country code update Start [ 11/13/17 22:00:44 ] [ MAXMIND UPDATE FAIL, Language File Missing, using previous Country code database ] Creating pfBlockerNG Continent XML files... Creating pfBlockerNG Continent XML files IPv4 Africa IPv6 Africa [ 11/13/17 22:00:45 ] IPv4 Antarctica grep: /usr/local/share/GeoIP/cc/Antarctica_v4.txt: No such file or directory IPv6 Antarctica grep: /usr/local/share/GeoIP/cc/Antarctica_v6.txt: No such file or directory IPv4 Asia IPv6 Asia IPv4 Europe IPv6 Europe [ 11/13/17 22:00:48 ] IPv4 North America IPv6 North America [ 11/13/17 22:00:49 ] IPv4 Oceania IPv6 Oceania [ 11/13/17 22:00:50 ] IPv4 South America IPv6 South America IPv4 Proxy and Satellite grep: /usr/local/share/GeoIP/cc/Proxy_and_Satellite_v4.txt: No such file or directory IPv6 Proxy and Satellite grep: /usr/local/share/GeoIP/cc/Proxy_and_Satellite_v6.txt: No such file or directory IPv4 TOP 20 grep: /usr/local/share/GeoIP/cc/Top_20_v4.info: No such file or directory IPv6 TOP 20 grep: /usr/local/share/GeoIP/cc/Top_20_v6.info: No such file or directory pfBlockerNG Reputation Tab Country Code Update Ended Adding pfBlockerNG Widget to the Dashboard... done. Remove any existing and create link for DNSBL lighttpd executable... done. Creating DNSBL web server start-up script... done. Upgrading Adv. Inbound firewall rule settings ... no changes required ... done. Custom commands completed ... done. Executing custom_php_resync_config_command()...done. Menu items... done. Services... done. Writing configuration... done. Message from lua52-5.2.4: ===> NOTICE: The lua52 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port Message from GeoIP-1.6.11: GeoIP does not ship with the actual data files. You must download them yourself! Please run: # /usr/local/bin/geoipupdate.sh Message from pecl-intl-3.0.0_10: **************************************************************************** The following line has been added to your /usr/local/etc/php/ext-20-intl.ini configuration file to automatically load the installed extension: extension=intl.so **************************************************************************** >>> Cleaning up cache... done. Success
Is there anything else I can do in the pfBlockerNG settings to sort this out?
-
From your logs… Something is blocking the MaxMind download... So need to see what is causing that...
Downloading MaxMind GeoIP databases. This may take a minute... GeoIP.dat... cURL Error: 60. cURL Error: 60. cURL Error: 60. Failed! MaxMind download Failed! Fetching MaxMind archive from pfSense package repo... /tmp/countrycodes.tar.bz2
The backup archive that is located on pfSense's servers is a little out of date… I should fix that.
Here is one of the files that you can test with to see why its failing to download:
https://geolite.maxmind.com/download/geoip/database/GeoLite2-Country-CSV.zipMaxMind does rate-limit if you attempt too many downloads in a day...
-
So, I don't wanna be one the one to ask this, but I am so eager to try 3.0. Any update when this will be released? I just did a clean install of the newest pfSense and like the changes and fixes in place but I didn't think to save all my config etc before I did it. (I know, really dumb of me). Would this of worked anyway? It's really tedious going through and looking for the lists again, so I'm feeling hopeful here it's coming soon as I really love pfBlockerNG and the work you do BBCan177!!! :)
-
@StylesNZ:
So, I don't wanna be one the one to ask this, but I am so eager to try 3.0. Any update when this will be released? I just did a clean install of the newest pfSense and like the changes and fixes in place but I didn't think to save all my config etc before I did it. (I know, really dumb of me). Would this of worked anyway? It's really tedious going through and looking for the lists again, so I'm feeling hopeful here it's coming soon as I really love pfBlockerNG and the work you do BBCan177!!! :)
Thanks, I am hoping to get this out shortly… Just trying to clean up a couple loose ends.... Stay tuned!
-
Thanks, I am hoping to get this out shortly… Just trying to clean up a couple loose ends.... Stay tuned!
maybe as a cristmas gift @bbcan ? ::) ::)
really look forward to your release -
-
Hi,
I have a custom IPV4 Denny List
On Custom Address(es) I have 9 IPs but only 7 off them are been loaded
5.9.110.236
54.207.50.1
187.17.111.97
169.45.117.93
96.6.123.19
104.16.84.55
104.16.83.55
162.243.102.114
187.61.117.226These two are not loading, I try to change order, set "Update Custom List" on drop down, etc.
5.9.110.236
162.243.102.114Any ideas?
Thanks