Need some help getting a lcd to work on a infoblox 1050a
grapeape last edited by
greetings i am new to pfsense and the forums. i have been running smoothwall for a long time and would like to try pfsense.
my hardware is a infoblox 1050a pent d 2.8 dual core 2gb ram and installed on a sata 8gb ssd drive
mb is a supermicro pdsmi ln4-ii008
my lcd is a EDX12232I-V02
i have looked all over the forums and google and lcdproc website and haven't come up with much regarding this box
i have tried many many settings in lcdproc but haven't had any luck
any help would be appreciated thanks in advance and have a great day
frontsidebus last edited by
i have same some infoblox appliance. this machines has two models of lcd, EDX12232I-V02 and matrix orbital GLK12232-25-SM.
This LCD are the same.
you can use lcd-proc developer package and select GLK driver and display size=4x20.
For select proper com port, in console "dmesg | grep uart" (to view how many com ports you have) and "ls /dev/cua*"
try it with cuau0 o cuau1.
SKiZZ last edited by
Here are my settings that worked.