Limit All Incoming/Outgoing to Same Limit
-
I just purchased a PFSense firewall and have it running. I would like to limit all traffic going in/out of my network to say 20MB/sec for the total traffic combined. I'm not caring to limit a certain IP address but would rather look to have 20MB at one time useable by anyone. I added a rate limit but it doesn't seem to be really be working. What would be the best method to rate limit for my needs?
I tried to add this queue to my WAN interface but it still seems to allow me to go over 20Mbps.
QUEUE BW SCH PRI PKTS BYTES DROP_P DROP_B QLEN BORROW SUSPEN P/S B/S
root_igb0 20M cbq 0 18020 1374804 0 0 0 0 0 2 349
Internet 20M cbq 18020 1374804 0 0 0 0 0 2 349Thanks in advance.
-
2 queues, 1 lan (download), 1 wan (upload). Set both to 20Mbit.