Gateway configuration
-
Hi all,
My pfsense got 3 port 1st port is for WAN 2nd port is for LAN and 3rd port is for Test. During my first test I connect port LAN 2 (192.168.0.1) with my laptop(192.168.0.1) then connect LAN (172.16.25.1) with juniper port e0/1(172.16.25.4) and juniper port e0/2(172.16.30.1) connect to another PC(172.26.30.10), and I set LAN gateway to Juniper 172.16.25.4 as default**(shown in attachment LANdef)** gateway. I can Ping from my laptop to another PC(172.16.30.2). Bu_t for my second test I bring UP WAN port with public IP 121.121.121.121 connect to Internet and set WAN as default gateway(as shown in attachment WANdef)_ I can only ping up until juniper port e0/1(172.16.25.4). but when I set LAN gateway back as default, I can ping all the way to pc 172.16.30.2. Is there any wrong in my setup ? My setup as shown in attachment setup
*I am still new to world of networking
-
Hi all,
I just solved my own problem ;D, It just simple thing that I miss look which is static route. I set my wan interface as default gateway then I add new static route for my juniper e0/2 interface from gateway LAN 1. now I able to ping from both end