<![CDATA[Filter Reload Status Error Message]]>I am testing pfSense-Full-Update-1.3-ALPHA-ALPHA-20080711-0323 on a compaq proiant GL360. I was able to install it with no trouble and am able to log into the admin interface from the LAN and WAN ports.

When I go to install any rules, it says,

"There were error(s) loading the rules: No ALTQ support in kernelALTQ related functions disabled pfctl: DIOCADDRULE: Operation not supported by device - The line in question reads [ DIOCADDRULE]: …"

I am not able to get traffic from lan to wan.

Also, in the system log, is this message (among others):

kernel: pid 83322 (host), uid 0: exited on signal 12 (core dumped)

pfsense 1.2 ran fine on the same hardware.

Any clues?

Thanks!

]]>https://forum.netgate.com/topic/9812/filter-reload-status-error-messageRSS for NodeWed, 14 Oct 2026 11:19:31 GMTTue, 15 Jul 2008 15:24:11 GMT60<![CDATA[Reply to Filter Reload Status Error Message on Tue, 15 Jul 2008 16:06:55 GMT]]>After updating to pfSense-Full-Update-1.3-ALPHA-ALPHA-20080714-1850 the problem went away - thanks!

]]>https://forum.netgate.com/post/177388https://forum.netgate.com/post/177388Tue, 15 Jul 2008 16:06:55 GMT<![CDATA[Reply to Filter Reload Status Error Message on Tue, 15 Jul 2008 15:40:59 GMT]]>Will do…

]]>https://forum.netgate.com/post/177386https://forum.netgate.com/post/177386Tue, 15 Jul 2008 15:40:59 GMT<![CDATA[Reply to Filter Reload Status Error Message on Tue, 15 Jul 2008 15:37:33 GMT]]>Can you please try with a newer snapshot and confirm you are getting the same errors?!

]]>https://forum.netgate.com/post/177384https://forum.netgate.com/post/177384Tue, 15 Jul 2008 15:37:33 GMT