Multi-WAN OutBound NAT Not Work
-
Hi Guys,
I've got a problem, I Have two WAN which route with 32ip each.
For InBound I used ARP Proxy to active those addresses with no problem.
But for out bound, I used NAT with BITMask. For the addresses for default gateway have no problem, But I can never use second WAN for outgoing, I found it always use default GW only. Follow with my settings:WAN 1 202.XXX.XXX.212 GW 202.XXX.XXX.209 -> 103.XXX.XXX.128 / 27 (Default GW)
WAN 2 202.XXX.XXX.220 GW 202.XXX.XXX.217 -> 103.XXX.XXX.160 / 27OutBound NAT Mapping:
WAN1 192.168.20.128/27 NAT 103.XXX.XXX.128/27 with Bitmask
WAN2 192.168.20.160/27 NAT 103.XXX.XXX.160/27 with BitmaskWhen Use 192.168.20.128 for Outbound, It's used 103.XXX.XXX.128
but When 192.168.20.160 for Outbound, It's used 202.XXX.XXX.212but If I set WAN 2 as default Gateway, It's just reverse.
192.168.20.128 -> 202.XXX.XXX.220
192.168.20.160 -> 103.XXX.XXX.160So, I think something setting may miss or some bugs there which make the firewall doesn't use the right Gateway.