<![CDATA[Status->Queues Bandwidth wrong?]]>So I've been playing with Traffic Shaping in the office with our new SG-4860 and I'm observing intermittent performance problems where the gateway can go into packet loss and then Offline (technically online but status reports it over I think 1 second gateway timeout).

During these times of intermittent traffic shaping hell, the Status–>Queues will show me something like this:

Interface WAN                    Bandwidth
Root Queue                        340.83Mbps
    qInternet                        340.83Mbps
        qACK                          8.45Mbps
        qDefault                    304.01Mbps
        qOthersHigh                28.22Mbps
        qOthersLow                471 bps
        qRDP                          154.59Kbps

Interface LAN
Root queue                        291.31Mbps
    qLink                            12.57 Mbps
    qInternet                      278.73Mbps
        qACK                        1.22 Mbps
        qOthersHigh              276.80 Mbps
        qOthersLow              92 bps
        qRDP                        710.18 Kbps

Any idea what's going on? These numbers should be impossible. Our business internet speed's are pretty horrible: 25Mbps down, 2Mbps up at the moment.

Edit: pfSense version is the latest, at 2.3.

pfstatusqueues.jpg
pfstatusqueues.jpg_thumb

]]>https://forum.netgate.com/topic/99119/status-queues-bandwidth-wrongRSS for NodeTue, 21 Jul 2026 07:56:52 GMTThu, 28 Apr 2016 16:54:05 GMT60<![CDATA[Reply to Status->Queues Bandwidth wrong? on Fri, 29 Apr 2016 00:20:12 GMT]]>@moikerz:

I got fed up with the same problem - it seems the web page can't keep up with the queue updates, and it backlogs something chronic.

Instead, try connecting to pfSense using PuTTY, and call the pfTop command: pftop -s1 -v queue. It updates a lot faster.
(reference: https://doc.pfsense.org/index.php/Traffic_Shaping_Guide#View_Queues_with_pfTop)

Here's a pretty picture (attached). I have one WAN, two LANs, which is why the existing 5 Queues are repeated 3 times, once for each interface.

Yeah, I have never trusted the queue stats either.

FYI, you can view pftop via the GUI. Diagnostics->pfTop :)

]]>https://forum.netgate.com/post/620708https://forum.netgate.com/post/620708Fri, 29 Apr 2016 00:20:12 GMT<![CDATA[Reply to Status->Queues Bandwidth wrong? on Thu, 28 Apr 2016 23:16:25 GMT]]>I got fed up with the same problem - it seems the web page can't keep up with the queue updates, and it backlogs something chronic.

Instead, try connecting to pfSense using PuTTY, and call the pfTop command: pftop -s1 -v queue. It updates a lot faster.
(reference: https://doc.pfsense.org/index.php/Traffic_Shaping_Guide#View_Queues_with_pfTop)

Here's a pretty picture (attached). I have one WAN, two LANs, which is why the existing 5 Queues are repeated 3 times, once for each interface.

pftop.jpg
pftop.jpg_thumb

]]>https://forum.netgate.com/post/620694https://forum.netgate.com/post/620694Thu, 28 Apr 2016 23:16:25 GMT