Unofficial E2guardian package for pfSense

pfsensation

@sei-pine said in Unofficial E2guardian package for pfSense:

hi how can i update to 5.2 ? i installed 5.1 but it doesn't show up on my installed packages hahaha weird

also i can't seem to block any website. i followed a youtube video that was provided here. and also viewed a blog by @ucribrahim

im using mitm, transparent proxy. should i also configure squid or leave it as is? i use my squid with squidguard last time so i already got it configured, also lightsquid.

edit: ok wait i did manage to block facebook, but i can still access youtube.com any tips ?

edit: ok nvm i get it now . i manage to properly display a blocked https website like fb and yt.

thanks to e2guardian and you guys for the help!

more power!

One thing I'd like to do in a new version is improve the acknowledge button. It's meant to be a bypass for admins which means it doesn't need to be shown for non admin groups.

I also recommend using a better Blacklist, I used to support Shallalist however they don't remove dead or parked domains. Which means it's become less efficient.

Here's one I've come to prefer (out of the free ones): ftp://ftp.ut-capitole.fr/pub/reseau/cache/squidguard_contrib/blacklists.tar.gz

ravegen

@marcelloc ,

do you have time to fix the content scanner that was broken after they have fix for the rotate log ?

pfsensation

@ravegen said in Unofficial E2guardian package for pfSense:

@marcelloc ,

do you have time to fix the content scanner that was broken after they have fix for the rotate log ?

I think Marcello was talking to you earlier on his last post. He said to try the latest version, which I think you're already on?

Have you tried a reinstall?

Sei Pine

@pfsensation gonna try this blacklist now

kenrutt

Is anybody using the content lists under ACLs in e2guardian?
I have been experimenting with it and when I put in a more complex regex, e2guardian crashes when I go to certain web sites such as google.

binkec

Hello forum
I also have problem with 2.4.4 broken content filter. I tried almost everything ( uninstall, new install...) and nothing works.
Content filter doesn't work, can someone give me any advice.
Regard
Bogdan

pfsensation

@kenrutt said in Unofficial E2guardian package for pfSense:

Is anybody using the content lists under ACLs in e2guardian?
I have been experimenting with it and when I put in a more complex regex, e2guardian crashes when I go to certain web sites such as google.

Regex requires a lot of cpu power, if you do it incorrectly its possible you're running out of resources.

pfsensation

@binkec said in Unofficial E2guardian package for pfSense:

Hello forum
I also have problem with 2.4.4 broken content filter. I tried almost everything ( uninstall, new install...) and nothing works.
Content filter doesn't work, can someone give me any advice.
Regard
Bogdan

What do you mean? Content filter was never broken. You most likely haven't set it up correctly. Go to ACLs and block any categories you don't want users accessing.

binkec

Thank you pfsensation for fast response.My mistake, content filtering is working ( sitelist, urllist ) problem is weighted list filter which doesn't work. I have few systems active hardware and virtual on 2.4.3 and they work OK. Try search in yahoo "f***ing" and 2.4.3 weighted filter block search, 2.4.4 with same settings doesn't.

pfsensation

@binkec said in Unofficial E2guardian package for pfSense:

Thank you pfsensation for fast response.My mistake, content filtering is working ( sitelist, urllist ) problem is weighted list filter which doesn't work. I have few systems active hardware and virtual on 2.4.3 and they work OK. Try search in yahoo "f***ing" and 2.4.3 weighted filter block search, 2.4.4 with same settings doesn't.

For encrypted sites like Yahoo, you need to make sure you have MITM enabled to phrase filter. You will need to generate a CA certificate and set it up within E2 Guardian and also deploy it to your clients.

binkec

I have done all that, like I said I have few working systems on 2.4.3, same configuration doesn't work on 2.4.4.
Here is a picture from 2.4.3 search

pfsensation

@binkec said in Unofficial E2guardian package for pfSense:

I have done all that, like I said I have few working systems on 2.4.3, same configuration doesn't work on 2.4.4.
Here is a picture from 2.4.3 search

Works perfectly fine for me and all the others. First time I'm hearing about this. The only issue we had on 2.4.4 was log rotation although that's already been fixed with an update. What authentication method are you using? I am 100% sure you have some configuration error, as the code itself is fine and I've used it on a few 2.4.4 system and also have it running at home without issues.

binkec

Thank you pfsensation, this information is very helpful. I will go over my config again and let you know. I use IP authentication.

pfsensation

@binkec said in Unofficial E2guardian package for pfSense:

Thank you pfsensation, this information is very helpful. I will go over my config again and let you know. I use IP authentication.

No problem, check the configuration again. See if E2 Guardian can see the traffic on the real time log and let us know if it works. :)

ravegen

@pfsensation said in Unofficial E2guardian package for pfSense:

@ravegen said in Unofficial E2guardian package for pfSense:

@marcelloc ,

do you have time to fix the content scanner that was broken after they have fix for the rotate log ?

I think Marcello was talking to you earlier on his last post. He said to try the latest version, which I think you're already on?

Have you tried a reinstall?

Yes I am already on the latest E2G version as per package installation and pfsense 2.4.4 version. I also tried E2G package reinstallation.

pfsensation

@ravegen said in Unofficial E2guardian package for pfSense:

@pfsensation said in Unofficial E2guardian package for pfSense:

@ravegen said in Unofficial E2guardian package for pfSense:

@marcelloc ,

do you have time to fix the content scanner that was broken after they have fix for the rotate log ?

I think Marcello was talking to you earlier on his last post. He said to try the latest version, which I think you're already on?

Have you tried a reinstall?

Yes I am already on the latest E2G version as per package installation and pfsense 2.4.4 version. I also tried E2G package reinstallation.

Are you getting any errors on the logs?

susamlicubuk

Hello Marcello.
I did try to "config sync" at eguardian, but i am seeing error abiut "ssl" and stopping machines running at eguardian that get config backup.
No problem when i trying server but all other machines send error about "eguardian 69897 certprivatekeypath is required when ssl is enabled"
This problem has continues when i editing and installing to other machines as same way.
Is there any reason about this problem?

marcelloc

@susamlicubuk, are you syncing the private key created on first server?

susamlicubuk

edit the normal certificate I copied and pasted into the certificate of other servers
still gives error
Is there another way?

ravegen

@pfsensation said in Unofficial E2guardian package for pfSense:

@ravegen said in Unofficial E2guardian package for pfSense:

@pfsensation said in Unofficial E2guardian package for pfSense:

@ravegen said in Unofficial E2guardian package for pfSense:

@marcelloc ,

do you have time to fix the content scanner that was broken after they have fix for the rotate log ?

I think Marcello was talking to you earlier on his last post. He said to try the latest version, which I think you're already on?

Have you tried a reinstall?

Yes I am already on the latest E2G version as per package installation and pfsense 2.4.4 version. I also tried E2G package reinstallation.

Are you getting any errors on the logs?

I have posted my logs previously.