Inconsistencies to fix: mpd.conf and interfaces.inc – set auth vs. set bundle
-
Where the interfaces.inc from 1.2.3-snapshots up to February 11 included the following lines:
EOD;
}
}$mpdconf .= << <eod<br>set bundle disable multilink
set bundle authname "{$pppoecfg['username']}"
set bundle password "{$pppoecfg['password']}"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0The interfaces.inc from the newer 1.2.3-snapshots since February 18 now include the following lines:
EOD;
}
}$mpdconf .= << <eod<br>set bundle disable multilink
set auth authname "{$pppoecfg['username']}"
set auth password "{$pppoecfg['password']}"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0To be able to connect via PPPoE with these newer snaphots (and to get a working mpd.conf again), we had to change "set auth" back to "set bundle" in our interfaces.inc. Will this problem get fixed? For reference please see our thread/topic "problem ppoe" in this forum.
Regards,
jaybird</eod<br></eod<br>