Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions

bmeeks

@dotlike said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

I have one question regarding the payload dump-option (barnyard-settings).
Is this feature working? I am not getting any dumps for download in the alert-section. Thanks in advance!

BR

I honestly do not know. I have not run Barnyard2 on my personal system for several years. The package is no longer really supported on FreeBSD (and I'm not sure it is supported anywhere anymore). By "supported" I mean updated and maintained. The only updates to the package in FreeBSD Ports have been done by the FreeBSD team themselves and involved only minor tweaks to the Makefile for various ports tree dependency issues. Nothing has been touched in the actual Barnyard2 source code in years. I know that it has issues with more recent versions of MySQL client.

So long lead-in to say Barnyard2 seems to be slowly decaying on the vine. The new direction in the Snort3 branch is JSON logging (much like Suricata has).

As for the current situation in pfSense, you can examine the Barnyard2 configuration file for the interface to see what is set in there. You can find the file in /usr/local/etc/snort/snort_xxxx (where that xxxxx will be a random UUID combined with the physical interface name).

pfcode

If only 2 or 3 rules in a category need to be ALERTed, the rest need to be DROP, what will be the easiest way to set up?

bmeeks

@pfcode said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

If only 2 or 3 rules in a category need to be ALERTed, the rest need to be DROP, what will be the easiest way to set up?

Use SID MGMT features to set the category to DROP. Then go to the RULES tab, select that category in the drop-down selector and find the 2 or 3 rules you want to be ALERT and change the action of just those rules using the icon under the ACTION column. Changes you make to individual rules on the RULES tab take precedence over all other modifications. Those are the last changes applied to rules.

pfcode

@bmeeks Thank you.

murzik

This post is deleted!

tbr45

@bmeeks Is it also possible to mark packets with the new Inline IPS Mode? This would allow the Traffic Shaper to apply rules based on the hostname, for example.

bmeeks

@tbr45 said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

@bmeeks Is it also possible to mark packets with the new Inline IPS Mode? This would allow the Traffic Shaper to apply rules based on the hostname, for example.

No, you can't mark packets. The binary can only pass them, reject them or drop them. A reject sends a notice back to the sender so it will not keep trying. A drop sends back nothing to the sender (the packet just appears to have fallen into a blackhole).

murzik

I am experiencing very strange behavior . Manged to track it down to one of emerging-scan.rules.
alert tcp $HOME_NET any -> any 445 (msg:"ET SCAN Behavioral Unusual Port 445 traffic Potential Scan or Infection"; flags: S,12; threshold: type both, track by_src, count 70 , seconds 60; metadata: former_category SCAN; reference:url,doc.emergingthreats.net/2001569; classtype:misc-activity; sid:2001569; rev:14; metadata:created_at 2010_07_30, updated_at 2017_05_11;)

Rule was set by Automatic SID managed to DROP, however no alert appeared in Alert List. But until I changed action for the rule from DROP to Alert, I could not get access to remote SMB share...

bmeeks

@murzik said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

I am experiencing very strange behavior . Manged to track it down to one of emerging-scan.rules.
alert tcp $HOME_NET any -> any 445 (msg:"ET SCAN Behavioral Unusual Port 445 traffic Potential Scan or Infection"; flags: S,12; threshold: type both, track by_src, count 70 , seconds 60; metadata: former_category SCAN; reference:url,doc.emergingthreats.net/2001569; classtype:misc-activity; sid:2001569; rev:14; metadata:created_at 2010_07_30, updated_at 2017_05_11;)

Rule was set by Automatic SID managed to DROP, however no alert appeared in Alert List. But until I changed action for the rule from DROP to Alert, I could not get access to remote SMB share...

The only possibility I can imagine that would cause a DROP action to not appear on the ALERTS tab (highlighted in RED to indicate a drop) is if the alert line from the log did not parse correctly. The code on the ALERTS tab reads the alert log for the interface line-by-line and parses each line into a set of fields delimited by commas. If a line does not parse out the correct number of fields, it is discarded and not displayed on the ALERTS tab.

To see if this is the case, get to the command line in pfSense either directly via the console or remotely via SSH. Then change to the correct Snort log interface directory in /var/log/snort. There will be a separate sub-directory under that path for each configured Snort interface. Once in the correct sub-directory, use grep to search the alert file for the rule SID in question to see if it is in there. Post back here with your findings. If the SID is there but is not showing on the ALERTS tab, then it is a parsing issue I need to look into. If you don't see the SID in the alert file for the interface, then that would be a binary issue you would take up with the upstream Snort team.

murzik

@bmeeks
I think that is a binary issue. Alert is not in alert file.
Thanks...

N0_Klu3

@crazybrain I believe the Atom 3558 with ix NIC's do work with netmap.
I'm running Suricata with inline no problem. There is also a command you can run (cant recall) and it shows its netmap enabled.

Now just waiting for pfSense 2.5 to drop.

@bmeeks can/will you be able to release Snort v4 on pfSense 2.4.5 release? Or is it only when 2.5 comes out?

bmeeks

@N0_Klu3 said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

@bmeeks can/will you be able to release Snort v4 on pfSense 2.4.5 release? Or is it only when 2.5 comes out?

Only when 2.5 comes out. The inline netmap option requires the netmap library from FreeBSD 12, and pfSense-2.4.5 is still FreeBSD 11 (although it is 11-STABLE).

chromefinch

So inline mode won't work with vlans? Even though they are hosted on a supported nic? what about a lacp lagg?

Should inline mode work on Intel 82576 or a Intel I340-T4?

I don't mean to seem lazy but this is the best write up I've found and I wouldn't mind listing some tested hardware here.

Thanks for all the great info!

bmeeks

@chromefinch said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

So inline mode won't work with vlans? Even though they are hosted on a supported nic? what about a lacp lagg?

Should inline mode work on Intel 82576 or a Intel I340-T4?

I don't mean to seem lazy but this is the best write up I've found and I wouldn't mind listing some tested hardware here.

Thanks for all the great info!

VLANs may work now in FreeBSD-12.3/STABLE. I have not tested them. pfSense-2.5 DEVEL moved to FreeBSD-12.3/STABLE a little while back. NIC drivers (the majority of them, anyway) in FreeBSD 12.3 have been ported to a new API called iflib. The iflib system handles all of the netmap stuff now for NICs that use iflib, and thus the NIC hardware driver is not burdened with that code development. The iflib subsystem is also supposed to support features such as VLANs, but there can still be issues with certain NICs that perform hardware-level VLAN tag manipulations.

So a long answer to basically say "I don't know for sure, but VLANs may work with some NICs now in pfSense-2.5 DEVEL with the Snort-4.x package using Inline IPS Mode".

The answer to your other question about netmap support in a given NIC depends on whether or not that hardware vendor migrated their driver over to iflib. Many have, a few have not per my understanding. And even some of those that have migrated may not have ported all versions of their hardware. So far as I know, most of the Intel NICs are ported over to iflib.

chromefinch

@bmeeks Thank you for your hard work and response! You've helped me in the past!

amazing!

So there shouldn't be an issue with running my wan in inline mode and my dmz vlan in legacy correct?

Most of my work with pfsense is remote so it is difficult to make risky changes, but i'd really like inline mode up on at least the wan.

Thanks again,

bmeeks

@chromefinch said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

@bmeeks Thank you for your hard work and response! You've helped me in the past!

amazing!

So there shouldn't be an issue with running my wan in inline mode and my dmz vlan in legacy correct?

Most of my work with pfsense is remote so it is difficult to make risky changes, but i'd really like inline mode up on at least the wan.

Thanks again,

Yes, you can run your LAN in Legacy Mode and WAN in Inline IPS Mode if desired. However, in my view it is usually more efficient in terms of resource utilization to just put the IDS/IPS on the LAN side (or DMZ and LAN, etc., if you have multiple internal interfaces). My reasoning is thus:

The WAN interface on pfSense will, by default, block all unsolicited inbound traffic. So having Snort detecting and blocking something the firewall is likely to block anyway is not beneficial IMHO.
The IDS/IPS sits between the firewall engine and the physical interface. So that means on the WAN it only sees traffic from your internal hosts after NAT rules are applied. That means in most cases every internal host will show up in WAN alerts as having the public IP address of the firewall. That is not helpful when trying to track down a problematic internal host.
If you have a properly configured firewall and have not installed a lot of extra "stuff" on it, then it has an extremely small attack surface and is pretty well "hardened" against attack. Snort or Suricata out front on the WAN is not going to really offer much additional protection- if any. So couple this fact with the items I mentioned in #1 and #2 above and you can see why I recommend putting the IDS/IPS on the internal interfaces only.

But there is no harm in using the setup you propose, but there are more efficient ways to consider configuring your setup.

chromefinch

@bmeeks That makes sense,
I host a small site and a few apps with pfblocker for geofencing.
Would it still be a good idea to disable the ips on the wan with those services running?

I am trying to sort out another issue with port mirroring for Security Onion as I keep getting zeek/bro notices telling me there is packet loss over the pfsense port mirror.

In your experience, how is the port mirroring performance in pfsense compared to Cisco's port span?

Thanks again, it's good talking to a master!

bmeeks

@chromefinch said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

@bmeeks That makes sense,
I host a small site and a few apps with pfblocker for geofencing.
Would it still be a good idea to disable the ips on the wan with those services running?

To answer that question, trace a network packet from the Internet to your internal web server. Doesn't that packet have to traverse your DMZ interface (assuming the web server is on a DMZ subnet)? If configured on your DMZ interface, Snort will be seeing all traffic coming from and going to your web server from any other firewall interface (including the WAN). So it can offer exactly the same protection to the web server on the DMZ as it would offer if Snort were running on the WAN.

Now consider the potential issues/irritations if Snort is running on the WAN. I assume you are using NAT and port forwarding to reach your internal web server in the DMZ. If not, then skip the rest of this paragraph. That means all the alerts you see on your WAN have the firewall's public IP in them. So how do you determine if you have an infected internal host and which one it is? To do that you would likely want to run the same Snort setup on your internal interfaces. Now you have duplicate or triplicate Snort instances just chewing up RAM and CPU cycles for what real benfit?

Why not just put the IDS/IPS close to the hosts it is actually protecting? The IDS/IPS is for your internal network. It is not to protect your firewall. Right? If your firewall needs protection, then you would want to find you another firewall ... . And when on the WAN interface, Snort is just going to see and alert on all the Internet "noise" traffic that the firewall is not going to pass anway. So why bog down your CPU logging crap that your firewall is not going to pass anyway?

So my answer is run Snort on your DMZ and maybe your LAN, but you likely don't want or need the same rules in both places. Select and enable rules to protect from the actual threats you face on that interface based on the services provided behind it. If you don't have a DNS server on the DMZ, then you don't need any DNS rules taking up CPU cycles and chewing up RAM. If you don't have a mail server running, then you don't need any of the SMTP server rules enabled. Being smart about the rules you select and enable and choosing those rules by the actual attack surface behind the interface lets you be efficient with the resource consumption of the IDS/IPS.

I am trying to sort out another issue with port mirroring for Security Onion as I keep getting zeek/bro notices telling me there is packet loss over the pfsense port mirror.

In your experience, how is the port mirroring performance in pfsense compared to Cisco's port span?

Thanks again, it's good talking to a master!

Port-mirroring is a hardware-intensive task. And when you have very high speed network ports it can get overwhelming for any switch very quickly. How exactly do you have port mirroring configured? What brand of switch are you using?

chromefinch

@bmeeks I'm totally blown away, that makes perfect sense! Excellent example.

Thank you! Again!

Currently I am using pfsense to mirror my vlans, which run over a 3GB lagg. The mirror port is a 10GB nic which is direct/copper attach to my seconion box.
I monitor pfsense cpu usage closely with either the dashboard or pftop and it never seems overwhelmed.

pfsense specs: i3 4170 with 16gb ram.
switch: Cisco WS-C4948E-S

breaking out ports to get inline working will complicate my port mirroring. That should be fun!!

bmeeks

@chromefinch said in Snort Package 4.0 -- Inline IPS Mode Introduction and Configuration Instructions:

@bmeeks I'm totally blown away, that makes perfect sense! Excellent example.

Thank you! Again!

Currently I am using pfsense to mirror my vlans, which run over a 3GB lagg. The mirror port is a 10GB nic which is direct/copper attach to my seconion box.
I monitor pfsense cpu usage closely with either the dashboard or pftop and it never seems overwhelmed.

pfsense specs: i3 4170 with 16gb ram.
switch: Cisco WS-C4948E-S

breaking out ports to get inline working will complicate my port mirroring. That should be fun!!

I suspect you would get much better performance letting your Cisco switching fabric (which is pure hardware for the most part) do the mirroring (called a SPAN port in Cisco speak).

If SecurityOnion says you are dropping packets, then it would follow that the dashboard and pftop and not providing all the relevant data. Or else SecurityOnion is mistaken ... .