Frr with get two BGP full route tables from Neighbors with openvpn Update Source
-
@jimp when your will fix it?
-
There isn't enough information to say what exactly is wrong yet, and we haven't been able to reproduce any crashes here so far. So there is no ETA on a fix.
2.5.0 is under development, it's not expected to be stable at this point.
-
@jimp That could be from the RADIX_MPATH / multipath options we enabled in the kernel and FRR on 2.5.0 to allow for multi-path/ECMP routing. It's entirely possible the code doesn't work as well as it should, since it's not as heavily tested.
maybe should check this.
-
i had try use frr vtysh shell add two openvpn ipv6 address , it still down too. So i think the pf frr with openvpn has bug.
-
@jimp said in Frr with use two ipv6 BGP Neighbors openvpn Update Source:
There isn't enough information to say what exactly is wrong yet, and we haven't been able to reproduce any crashes here so far. So there is no ETA on a fix.
2.5.0 is under development, it's not expected to be stable at this point.
your try frr get two ipv6 full table upstream. why only has one ipv6 upstream is normal work.
-
@jimp i try setup use openbgpd normarl work ipv6 with openvpn. so i think the frr sure has bugs.
-
frr v7.2 is out, we need for upgrade?
-
<118>Configuring LAGG interfaces...
<6>lagg0: IPv6 addresses on igb0 have been removed before adding it as a member to prevent IPv6 address scope violation.
<6>lagg0: link state changed to DOWN
<6>lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.
<118>done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.2'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN interface...
<6>ng0: changing name to 'pppoe0'
<6>igb2: link state changed to UP
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring WAN2 interface...
<6>ng1: changing name to 'pppoe2'
<6>igb3: link state changed to UP
<6>lagg0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun7: changing name to 'ovpnc7'
<6>tun3: changing name to 'ovpnc3'
<6>tun9: changing name to 'ovpnc9'
<6>tun10: changing name to 'ovpnc10'
<6>tun11: changing name to 'ovpnc11'
<118>done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<6>gif4: link state changed to DOWN
<6>gif4: link state changed to UP
<118>Generating RRD graphs...done.
<118>Starting UPnP service... done.
<6>gif0: link state changed to DOWN
<6>gif0: link state changed to UP
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>>>> Removing unnecessary packages... done.
<118>>>> Cleanup pkg cache... done.
<118> Starting package Shellcmd...done.
<118> Starting package Cron...done.
<118> Starting package Backup...done.
<118> Starting package Filer...done.
<118> Starting package LADVD...done.
<118> Starting package iftop...done.
<118> Starting package mtr-nox11...done.
<118> Starting package RRD Summary...done.
<118> Starting package Service Watchdog...done.
<118> Starting package Notes...done.
<118> Starting package OpenBGPD...done.
<118> Starting package acme...done.
<118> Starting package Traffic Totals...done.
<118> Starting package System Patches...done.
<118> Starting package sudo...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package iperf...done.
<118> Starting /usr/local/etc/rc.d/bgpd.sh...done.
<118>pfSense 2.5.0-DEVELOPMENT amd64 Thu Nov 21 21:28:02 EST 2019
<118>Bootup complete
<6>ovpnc7: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>ovpnc11: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc3: link state changed to DOWN
<6>ovpnc3: link state changed to UP
<6>ovpnc3: link state changed to DOWN
<6>ovpnc9: link state changed to DOWN
<6>ovpnc9: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>re0: link state changed to DOWN
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<6>ovpnc7: link state changed to DOWN
<6>ovpnc7: link state changed to UP
<3>rn_delete: Orphaned Mask 0xfffff801c10ab060 at 0
<3>rn_delete: Orphaned Mask 0xfffff803c6d3b320 at 0
<3>rn_delete: Orphaned Mask 0xfffff8042a4741a0 at 0
<3>rn_delete: Orphaned Mask 0xfffff803c6e202c0 at 0
<3>rn_delete: Orphaned Mask 0xfffff801c0875a80 at 0
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 11
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e7d451
stack pointer = 0x28:0xfffffe0095ab53c0
frame pointer = 0x28:0xfffffe0095ab54c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 64872 (bgpd)
version.txt0600007113566056012 7535 ustarrootwheelFreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense -
<118> Starting package Service Watchdog...done.
<118> Starting package Notes...done.
<118> Starting package System Patches...done.
<118> Starting package iperf...done.
<118> Starting package FRR...done.
<118>pfSense 2.5.0-DEVELOPMENT amd64 Fri Nov 29 08:22:22 EST 2019
<118>Bootup complete
<6>ovpnc11: link state changed to UP
<6>ovpnc9: link state changed to UP
<6>ovpnc3: link state changed to UP
<6>ovpnc10: link state changed to UP
<6>ovpnc7: link state changed to UP
<3>rn_delete: couldn't find our annotationFatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 13
fault virtual address = 0x70
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e7d451
stack pointer = 0x28:0xfffffe00944f43a0
frame pointer = 0x28:0xfffffe00944f44a0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 53160 (Zebra dplane)
version.txt0600007113570412703 7533 ustarrootwheelFreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense -
i need edit this, when frr got two or more and ipv4 or ipv6 full route tables from neighbors via openvpn update Source, then frr will down.
-
The results of repeated tests should be that there is a problem with the system, which has an impact on multiple BGP software, but it has the greatest impact on frr, causing the system to be paralyzed.
-
i have to change back to pf 2.4.4-p3, this version bgp work normal. so i think pfsense 2.5 has bugs now.
-
report
-
use openbgpd get the same issue.
-
@yon-0 said in Frr with get two BGP full route tables from Neighbors with openvpn Update Source:
openbgpd
openbgpd
-
Version String: FreeBSD 12.0-RELEASE-p10 fe839027797(RELENG_2_5) pfSense
-
2.5.0-DEVELOPMENT (amd64)
built on Sun Dec 29 11:28:22 EST 2019
FreeBSD 12.0-RELEASE-p10Crash report pf.txt
-
2.5.0-DEVELOPMENT (amd64)
built on Sun Dec 29 11:28:22 EST 2019
FreeBSD 12.0-RELEASE-p10FRR Crash report
pf.txt -
the same config work in pf 2.4.4, but it is crash in pf2.5
2.5.0-DEVELOPMENT (amd64)
built on Fri Jan 03 22:01:28 EST 2020
FreeBSD 12.0-RELEASE-p10 -
2.5.0-DEVELOPMENT (amd64)
built on Sun Jan 05 00:41:14 EST 2020
FreeBSD 12.0-RELEASE-p10