wifi card

Gertjan

I was curious ... a AP less then 20$ and you (Bezos actually) announced 18 $, worlds most ugly (imho) router
Is that AP subsidized by some government or what ?

@johnpoz said in wifi card:

Just turn off its dhcp server and connect it to your network with one of its lan ports = access point.

That's still partially classified as rocket science amongst network admins.

Anyway, I went full "Unifi" mode recently ("look mam, no more power bricks !"), not the same price, roughly 10 x more, but oh boy, the GUI (the controller) is .... beautiful !?

Nan, that can only be valid for an American house. Here in France, probably just one room.

johnpoz

@jhmc93 why would you put your wifi AP where your router is? That is unlikely to be the best spot for wifi coverage ;)

Get a real AP and mount it where they belong (on the ceiling) - they take up really no space that way. They use poe so no need to have power where you put them, etc.

I just don't see how some N wifi card that can't even do 2.4 and 5 at the same time located where your router is would provide any sort of actual useful wifi..

I have 3 AP in my home - they take up no space since they are mounted to the ceiling. And have full coverage no matter where I am in the house.. With good signal..

Looking at the 42 devices currently connected to my wifi the lowest signal is (-61 to 65) dBm which is a firestick on the back of a TV.. So not really best place for signal ;) and strongest is -32 dBm which currently my little hub for my smoke alarms. Sitting on top of my rack under my desk. But the AP is just on the other side of the wall on the ceiling in the hallway. And that firestick prob not selecting its best choice for AP.. The TV is between it and the AP its currently connected to - bet if I moved it to a different AP its signal would go up.

Well look at that, forced it to different AP, and got like a bump of 10 in the strength.

Which came with a bump in PHY from 585 to 780.. Now its wifi isn't having to go through the TV, its connecting to AP in other direction with the TV not in the path of the signal.

I even have decent coverage outside on my patio because one of the AP is near the patio door.

You do you and good luck with it. But you are either going to have crappy wifi, or if you do it right great wifi that you never have to worry about. With low latency, stable and strong signal and coverage everywhere in your home.

I can understand a budget - but you either spend a few bucks and have something that works all the time everywhere you need it. Or you going to have to deal with low speed and spotty coverage and the frustration that comes with that sort of connection.

I would think people moving to pfsense would be after full featured stable robust network. In this day and age that would include wifi and great you got a router that can handle most anything you throw at it or want to do.. But then some N wifi card to provide wifi that can't even dual band at the same time? Which is a limitation of what freebsd wifi support is currently.

stephenw10

Yup, use an external AP.

But that card should work in pfSense. Unless it hits the firmware load bug in 2.8. I don't have one to test.

jhmc93

@johnpoz and @stephenw10 I just wanna get the card working, every time I load into pfsense it doesn't pick the card up, so if someone can just help me get it working it would be great if that's ok, I don't wanna use external. even though it suggested.

stephenw10

What does it show at boot? Some firmware failure. What pfSense version are you testing in?

stephenw10

Ah, a further issue here is that iwn doesn't support hostap mode and that's a show stopper if you want to use it as an access point:

The iwn driver supports station and monitor mode operation.

jhmc93

@stephenw10 2.8.0, not able to provide that as I can't see anything matching it

stephenw10

You should see something in the boot logs even it just shows as an unknown device. But as I say it can only work as client or to scan for traffic.

jhmc93

@stephenw10 it shows as pci but doesn't show any errors

stephenw10

What does it actually show though?

provels

@jhmc93 said in wifi card:

Intel Centrino Advanced N 6230 WiFI

AFAIK, Intel cards can function as clients, but not APs. If you choose to pursue, you're better off with a Atheros chipped card, like the AR 9280, 9380, 9565. I've tried these, just bc I like to screw parts together and spend minor money. Limited to 'N' speeds.

Compex WLE200NX
Apple AR5BXB112
HP 690019-001

NOT the Compex WLE600VX, though. But it works great in Linux.

jhmc93

@stephenw10 Solved! I'm running pfsense on proxmox so I passed through the wifi adapter but forgot to tick all functions and pci express box. It now works thanks for your help