Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Using CP on OPT interface with wireless AP?

    Scheduled Pinned Locked Moved
    Captive Portal
    6
    31
    12.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      danbutter
      last edited by

      I actually tried two different systems one of which was. From back at .9xx something. But I never went past 1.0.1 with that one.
      The current one I am using is using the latest snapsnot that sullrich posted. This box was a fresh install of 1.0.1.

      I could burn a disc and try a new install.

      Maybe tomorrow.

      1 Reply Last reply Reply Quote 0
      • H
        hoba
        last edited by

        Please send me your config.xml to holger <dot>bauer <at>citec-ag <dot>de. Maybe some other feature like nat reflection or whatever is not playing well in the mix.</dot></at></dot>

        1 Reply Last reply Reply Quote 0
        • D
          danbutter
          last edited by

          will do, but in the meantime I have even more weirdness to report.

          Ok this box has 4 nics and therefore 2 OPT interfaces.
          Just messing around I left the OPT1 that I had named CP alone. No changes at all.

          I then enabled the OPT2 interface.
          Gave it an IP of 192.168.33.1
          went to the DHCP server put that IP as the dns and set a range from 192.168.33.22 to .55
          Went to firewall > rules and this time set ANY rather than leaving it at TCP.
          Plugged in the wireless and it worked!
          Tried with computer and the crossover cable and it worked!

          I thought great! it works, but…
          I used a usb wireless adapter  on my main computer.  I would switch between them in network connections by disabling one and using the other one to test the wireless.

          Well... when I went to switch back to the wired nic which should be LAN I got an IP from the OPT2 interface!
          I tried to release and renew...same IP.  I tried to use flushdns in between there...same IP.
          I rebooted the machine...same IP.
          I went to another PC on the network that still had a valid lease and got into the web interface and turned off the OPT2 interface...same IP.
          I then turned it back on, went to the DHCP server for OPT2 and disabled it.

          Now I can get an IP for the LAN as I am supposed to.

          I'm starting to think my pfsense box is haunted.

          sending the config in a couple mins here.

          1 Reply Last reply Reply Quote 0
          • J
            jeroen234
            last edited by

            @danbutter:

            Ok, I documented everything I did as I did it so that someone can hopefully tell me what I did wrong.

            Ok then I then changed the name of the OPT1 interface to CP, changed it's IP to 192.168.11/24, enabled it and clicked on save.

            Thanks for any help anyone can give me here.

            i hope you meen 192.168.11.1/24

            1 Reply Last reply Reply Quote 0
            • D
              danbutter
              last edited by

              yes, I did mean 192.168.11.1/24.

              Good catch though.

              1 Reply Last reply Reply Quote 0
              • D
                danbutter
                last edited by

                Just to update this, I was able to do the same thing on the OPT1 interface.
                I changed the IP to a /16 rather than /24 and changed the firewall rule to ANY rather than just TCP and it works.

                However the DHCP server for the OPT interface still takes over my LAN clients.
                I have to turn off the DHCP server for the OPT interface to get the one on the LAN interface to work again.
                Strange.

                hoba…Did you get the config.xml that I sent to you?

                1 Reply Last reply Reply Quote 0
                • H
                  hoba
                  last edited by

                  Didn't get anything yet.

                  1 Reply Last reply Reply Quote 0
                  • D
                    danbutter
                    last edited by

                    well, I sent it out on the 16th so I either typed something wrong or maybe your email doesn't like hotmail?

                    Either way I am attaching it now.
                    I don't think there is anything private in there.

                    config.xml.txt

                    1 Reply Last reply Reply Quote 0
                    • H
                      hoba
                      last edited by

                      Ok, I'll test it with one of my systems soon.

                      1 Reply Last reply Reply Quote 0
                      • D
                        danbutter
                        last edited by

                        Ok thanks.
                        No hurry. 
                        I won't be messing with the box till next year at this point anyway.

                        I do believe that I will do a fresh install of 1.0.1 though as there are things like the shaper wizard that are broken for me in the snapshot.
                        I also keep getting a very strange thing where some computers on my network will only get between 5 and 6MB to the internet while others get 20Mb….it isn't all the time....just strange.
                        So I think a fresh install is in order after the holidays.

                        1 Reply Last reply Reply Quote 0
                        • G
                          greyman
                          last edited by

                          Ok. Just installed 1.0.1 on a 4801-60. All is working fine. for me until I enable captive portal (CP). I basically have my network configured the same way. Here is what I have

                          sis0: LAN:  192.168.0.1/25
                          sis1: WAN: DHCP (Public IP Supplied by SBC DSL Modem)
                          sis2: OPT:  192.168.0.129/25 (Airport wireless Network with WDS)

                          sis0 is running a DHCP server for the LAN clients
                          sis2 is running a DHCP server for the users that are wireless

                          all this works before enabling CP. Once I enable CP the browser never gets redirected to the CP to allow me to authenticate.

                          any ideas?

                          1 Reply Last reply Reply Quote 0
                          • H
                            hoba
                            last edited by

                            @hoba:

                            …you need to use the interface IP of the captive portal enabled interface as DNS server for the redirect to work and to bring up the CP page....

                            1 Reply Last reply Reply Quote 0
                            • G
                              greyman
                              last edited by

                              After reading thru the thread before posting by post I had noticed that and have set it up accordingly. The DHCP server that assigns IP addresses on that interface assigns the interface as the primary DNS server.

                              Still NO go.  ;-(

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post