Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfSense on Watchguard hardware

    Scheduled Pinned Locked Moved
    Documentation
    8
    36
    33.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Yes I need to get my finger out and add some pictures.  ::)

      The X550e shares the same motherboard as the X750e and x1250e and as such has 4 Gigabit NICs. The 10/100 limit stated by Watchguard is a software restriction, I assume, when running the Watchguard OS. Watchguard uses this to differentiate between it's models and allow for upgrading across model types via software only. pfSense has no such restrictions.  :)

      Are you running lcdproc at all? How are you running it? I'm planning to add that section detailing the different ways to run it and recommending the hybrid startup setup I detailed here: http://forum.pfsense.org/index.php/topic,7920.msg344513.html#msg344513 It's working perfectly for me but I've only had one other report, it was positive. I don't want to add any potentially bad info.

      Steve

      1 Reply Last reply Reply Quote 0
      • P
        Prowler
        last edited by

        Thanks for setting me straight on the X550e ports.  I had no idea that watchguard used software to restrict them to 10/100!  My offer to help with the wiki stands even if you want to review possible changes first.

        Yes i installed lcdproc dev 0.5.6 from the package menu in pfsense 2.0.3. I have had problems with it not starting reliably and crashing out randomly. I doesn't affect the operation of the firewall, but i wanted to look into the cause. If i manually start it after the firebox boots, it seems to work for a while. Days later i'll look and see that it crashed again.  The front panel buttons don't work at all for me on this version.

        Aug 20 18:31:09 php: lcdproc: Too many errors, the client ends.
        Aug 20 18:31:09 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:31:08 php: lcdproc: Too many errors, the client ends.
        Aug 20 18:31:08 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:31:06 apinger: Error while feeding rrdtool: Broken pipe
        Aug 20 18:30:58 php: lcdproc: Start client procedure. Error counter: (3)
        Aug 20 18:30:58 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:57 php: lcdproc: Start client procedure. Error counter: (3)
        Aug 20 18:30:57 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:47 php: lcdproc: Start client procedure. Error counter: (2)
        Aug 20 18:30:47 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:46 php: lcdproc: Start client procedure. Error counter: (2)
        Aug 20 18:30:46 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:36 php: lcdproc: Start client procedure. Error counter: (1)
        Aug 20 18:30:36 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:35 php: lcdproc: Start client procedure. Error counter: (1)
        Aug 20 18:30:35 php: lcdproc: Failed to connect to LCDd process Operation timed out (60)
        Aug 20 18:30:25 php: lcdproc: Start client procedure. Error counter: (0)
        Aug 20 18:30:24 php: lcdproc: Start client procedure. Error counter: (0)
        Aug 20 18:30:24 LCDd: Critical error while initializing, abort.
        Aug 20 18:30:24 LCDd: sock_init: error creating socket - Address already in use
        Aug 20 18:30:24 LCDd: sock_create_inet_socket: cannot bind to port 13666 at address 127.0.0.1 - Address already in use
        Aug 20 18:30:24 LCDd: Using Configuration File: /usr/local/etc/LCDd.conf
        Aug 20 18:30:24 LCDd: LCDd version 0.5.6 starting

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          I have an X550e but I have only ever run pfSense on it. I had no idea they were ever anything but Gigabit until you pointed me at that table! That does clarify some questions from others though. Perhaps we should add something specifically mentioning that if people aren't choosing the X550e believing it isn't Gigabit.

          It's very frustrating that the lcdproc-dev package doesn't start correctly, more so that it's only a problem with the sdeclcd driver. I've spent a good number of hours trying various changes and failed to get anywhere. The lcdproc client is a php script and it occasionally craps out for some reason. The original lcdproc package had a shell script that run to keep the client running but we removed it as it looked pointless. Wrong! In 2.1 there is a time limit for all php processes unless the are started especially to avoid it so that would also be an issue. Running the standard lcdproc client from shellcmd avoids all that, it's worked perfectly for me so far.
          Interesting that you say the cursors buttons don't work for you. Do you know if they work at all? I have noticed that I'm running 0.5.5 on at least one box but 0.5.6 on others. All working fine. The driver hasn't changed in that time.
          I'd be interested in your experience trying the hybrid method. Does it run for you? Are those instructions sufficient?

          Because I've been looking into this stuff for so long now it's hard for me to imagine what it must be like to try and do this for the first time, what information is needed and what is unnecessary and confusing. Right now the greatest help would be to read through the page with fresh eyes and spot what I got wrong.
          I have examples of all the models here for photographic purposes I just have to arrange them suitably. I'm not really setup for product photography!  ;) I'm sure I'll manage something.

          Steve

          1 Reply Last reply Reply Quote 0
          • P
            Prowler
            last edited by

            Steve,

            I can tell you from my experience that i believed that the x550e was only 10/100 because that's what the firebox manual said.  When i bought my first firebox i purposely stayed away from buying a x550e for that reason alone. I talked with several other firebox owners and they all had the same misconception that i did.  The wiki should somehow indicate that the x550e is indeed capable of gigabit with pfsense in spite of what the firebox manual states.

            The front buttons on my x750e have worked in the past.  I had forgotten that the lcd driver and configs did not stick before i upgraded to 2.0.3.  I'll try your fix and see what happens. I have often thought about replacing the LCD with something faster, more capable, and more reliable. I wouldn't mind for the backlight to stay on, but have read about its often limited life.

            I'll start looking over the wiki, and let you know if i see anything else.  BTW, i just bought a x550e tonight!

            1 Reply Last reply Reply Quote 0
            • P
              Prowler
              last edited by

              Steve,

              I was going to try your fixes for lcdproc, but mine has been crash free now for about 6 days.  It even starts properly upon boot.  I have been rebooting the firebox everyday in an attempt to break it, but it seems solid now.

              I did uninstall and re-install the package, but other than that i didn't do anything else.  Have you noticed any change in yours?

              Mike

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                The boxes I have running currently are all using the shellcmd start method.
                There have been some developments recently that may help this situation, I commented in the lcdproc-dev thread. I'm not holding out much hope.
                Do you have the standard CPU in your x750e? Are you running 2.0.3?

                Steve

                1 Reply Last reply Reply Quote 0
                • T
                  ttblum
                  last edited by

                  I'm noticing the Marvel 88e8001 NICs aren't listed in the FreeBSD hardware compatibility, they work OK on the X-Core-e models?

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Yes, they work fine supported by the sk(4) driver. They're PCI though so that limits them.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • R
                      Roofus
                      last edited by

                      Hi,

                      As the Bios iso still valid?  Tried downloading, looks too small a file (1 MB) and physdiskwrite.exe would fail.  Tried another Bios.iso (8MB) and physdisk would succeed.

                      Thanks

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Which file exactly? The FreeDOSBIOS2 file is gzipped and should be ~4.2MB. When I downloaded it a minute ago it still matched the MD5 given in the docs. It's not an ISO which might be causing your problem.

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • R
                          Roofus
                          last edited by

                          It is the FreeDOSBios2.img.gz file  when I download it the size is 1KB (not 1MB as I mentioned before).

                          Followed the 'Download this image' link

                          Write to CF fails with error.

                          Andrew

                          2014-08-28_09-05-52.jpg
                          2014-08-28_09-05-52.jpg_thumb

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Perhaps you downloaded the little padlock picture? The URL given by the hyperlink is correct:
                            https://sites.google.com/site/pfsensefirebox/home/FreeDOSBios2.img.gz

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • R
                              Roofus
                              last edited by

                              I have tried two PC's, two different networks and same result.

                              I am correct that the .gz file should not be 1KB !

                              Thanks

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Yes, you are certainly are right. 1K is far too small, it's probably some error message instead of the real file. How are you downloading it? Just tested it from my pfSense box:

                                [2.1.4-RELEASE][root@pfsense.fire.box]/tmp(7): fetch -o /tmp https://sites.google.com/site/pfsensefirebox/home/FreeDOSBios2.img.gz
/tmp/FreeDOSBios2.img.gz                      100% of 4239 kB 2180 kBps
[2.1.4-RELEASE][root@pfsense.fire.box]/tmp(8): md5 FreeDOSBios2.img.gz 
MD5 (FreeDOSBios2.img.gz) = 5ebb3f11925a8a78f7829e3ca0823f5d

                                Seems to be working fine.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • R
                                  Roofus
                                  last edited by

                                  Using windows IE,+ right click + save as.

                                  You have given me an idea, I'll use Chrome and try again.

                                  Hmm, just used chrome and it worked  :o

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Google sites doesn't like IE?  ::) If you go to the site and just click the file it takes you to a 'download page' of some sort. I expect you were actually downloading the html for that instead.
                                    I'll add a note to the docs.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post