HEADS UP: Updated em/igb/ixgbe back in snapshots

maverick_slo

Huh only March 8 snapshots are available…
Something went wrong?

stephenw10

The build server maybe not running for some other reason. The new drivers may be in the 8/3/14 build. Unfortunately we I …uh...can't check the (cough) tools. ;)
Logs show it built images successfully yesterday but hasn't uploaded them.
I'll check my test box.

Looks 8/3/14 is still using the 7.3.2 em driver so wait for a new snapshot.

[2.1.1-PRERELEASE][root@pfsense.localdomain]/root(1): uname -a
FreeBSD pfsense.localdomain 8.3-RELEASE-p14 FreeBSD 8.3-RELEASE-p14 #0: Sat Mar  8 12:47:31 EST 2014     root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386  i386
[2.1.1-PRERELEASE][root@pfsense.localdomain]/root(2): sysctl dev.em
dev.em.0.%desc: Intel(R) PRO/1000 Network Connection 7.3.2
dev.em.0.%driver: em

Steve

jimp

Builder VMs are offline at the moment, shuffling some things around again completely unrelated to anything else. Once things settle we'll fire them back up and get new snapshots out.

stephenw10 - you can get access to the tools repo if you follow the instructions on the list, mail in a copy of your ssh public key to the address given on the list in the thread.

stephenw10

Yes, I realise I could but thanks. I haven't done so because this is the first time I've had reason to look at the tools repo. I have (currently) no need to modify or compile the code only occasionally reviewing what's been changed.

Steve

jasonlitka

@ermal:

The drivers from HEAD have been enabled again in the snapshots after fixing the cause of panics.

Please try them again in later snapshots.

SWEET!

I'll update to a newer snapshot next week. Right now I'm in the middle of trying to migrate about 55TB of data from two failed storage arrays…

stephenw10

em drivers back to current. :)

[2.1.1-PRERELEASE][root@pfsense.localdomain]/root(3): sysctl dev.em.0
dev.em.0.%desc: Intel(R) PRO/1000 Network Connection 7.3.8

Steve

jasonlitka

@Jason:

SWEET!

I'll update to a newer snapshot next week. Right now I'm in the middle of trying to migrate about 55TB of data from two failed storage arrays…

So the good news is that it's not crashing any more.

The bad news is that I still seem to be hitting a pretty hard wall at ~2.1Gbit/s across 10Gb ix interfaces (tried both SFP+ Direct Attach and Intel SR optics with a 1M OM3 patch). Anyone have any thoughts on that? It's 2.1Gbit/s of TOTAL throughput, not in each direction.

sebastiannielsen

Shouldnt the first post and/or the thread title be edited to tell that the issue is now fixed and the drivers will be included in 2.1.1 then?

jimp

@sebastiannielsen:

Shouldnt the first post and/or the thread title be edited to tell that the issue is now fixed and the drivers will be included in 2.1.1 then?

Good point. I'll fix it.

adam65535

Is there a way we can monitor major changes like this in drivers? Normally we would just follow the pfsense-tools git branch but I don't see that anymore.