PfSense on PROXMOX with VLANs?
-
I am new to proxmox and Pfsense but I have managed to add a /28 subnet, and install Pfsense on KVM relatively "easy".
One of the IPs of the subnet is assigned on a Proxmox bridge and (vmbr1) works ok.
On proxmox I also have the following bridge (with no IP):–
auto vmbr3
iface vmbr3 inet manual
bridge_ports none
bridge_stp off
bridge_fd 0The proxmox kvm has 2 NICs, one connected to vmbr1 (as WAN) and the other to vmbr3 (as LAN, 192.168.0.1)
If I create another KVM, and connect it to vmbr3 then I have a happily working KVM behind the Pfsense.
What I want to achieve however (and I can't!) is to create VLANs behind Pfsense.
My problem is not creating the VLANs inside Pfsense but on how to connect the different kvms on those VLANs!I have followed this tutorial up to the point that the author makes changes on the switch :
http://www.youtube.com/watch?v=-Nf_XsmMmWoPfsense shows WAN, LAN, VLAN1 and VLAN2.
The mystery is how to attach KVMs on VLAN1 & VLAN2!!!I am assuming here that something needs to be done on the proxmox network and can't figure what (and possibly how) as I exhausted my knowledge!
Can someone please heeeeelp? :'(
Nikole