PfBlockerNG v2.0 w/DNSBL
-
Can you ping the VIP ?
Can you access http://172.16.15.14
Are all clients DNS using pfsense with DNSBL ?
Anything in the Systems Log or Firewall Logs, pfblockerNG log files ? -
No clue, no bridge here.
Did you look at all posts in this thread and the pfBlockerNG thread to see if people had the same issues?No, not yet.
Can you ping the VIP ?
Can you access http://172.16.15.14
Are all clients DNS using pfsense with DNSBL ?
Anything in the Systems Log or Firewall Logs, pfblockerNG log files ?Can't ping or access it. I think it's because bridges usually don't do NAT and I don't think that there is a way to create the functionality DNSBL needs (services on port 80/443). but without using NAT. Please tell me I am wrong. :)
-
I found a way to use DNSBL on my transparent bridge! :D
I configure DNSBL to listen on LAN at 10.10.10.1 as usual. But then (because I never get a reply from 10.10.10.1) I just reject all connections to "This Firewall" on ports 8081 and 8443.
I won't get any stats or 1x1 gifs but web sites load fast and without ads. :) -
Hey all,
I'm trying to set up PFBlockerNG with GeoIP to block everything apart from my country by only PERMITTING my country, rather than selecting everything apart from my country and blocking inbound.So under GeoIP i have selected <mycountry>under Top 20 and then Permit Inbound
This creates a permit rule under floating rules but i think im confusing myself as to what is happening here.
I have a web server running on the WAN, for which i have a WAN rule that permits any source to port 80 and 443. If there is a floating rule that allows UK IP's is that not allowing all UK IP's / Ports into my network? At what point does the float rule come into it?
What i want is for the firewall to check if the source is from the UK, if not block, then if its destined for port 80 or 443, if not block.
So under General - Rule Order should i select:-
pfB_Pass/Match | pfSense Pass/Match | pfB_Block/Reject | pfSense Block/Reject
or (leaning to this one)
pfSense Pass/Match | pfB_Pass/Match | pfB_Block/Reject | pfSense Block/Reject
Thinking it will match on 80 or 443 then match on UK.
Or something else, am i going about this the correct way? I kind of expected a blocking rule somewhere for ! <mycountry>Sorry - getting my head in a right pickle here. ;D</mycountry></mycountry>
-
https://forum.pfsense.org/index.php?topic=102470.msg647719#msg647719
Then you can install or re-install the pfBlockerNG 2.1.1_2.
The install should update the MaxMind (this take 5+ minutes) and proceed to completion. -
hi all,
i have performed this change, still the pfBlockerNG is not seen anymore in gui.
anyone had this before? -
Where does it fails when you install it ? There must be some hints in the installation logs, system log or pfblockerng log.
-
php /usr/local/www/pfblockerng/pfblockerng.php dc
and as it's shown in the logs :
Download Process Starting [ 08/15/16 21:18:57 ]
/usr/local/share/GeoIP/GeoIP.dat.gz 200 OK
/usr/local/share/GeoIP/GeoIPv6.dat.gz 200 OK
/usr/local/share/GeoIP/GeoLite2-Country-CSV.zip 200 OK
/var/db/pfblockerng/top-1m.csv.zip 200 OK
Download Process Ended [ 08/15/16 21:19:31 ]Country code update Start
Converting MaxMind Country databases for pfBlockerNG.
Processing ISO IPv4 Continent/Country Data
Processing ISO IPv6 Continent/Country Data
Creating pfBlockerNG Continent XML files
IPv4 Africa
IPv6 Africa
IPv4 Antarctica
IPv6 Antarctica
IPv4 Asia
IPv6 Asia
IPv4 Europe
IPv6 Europe
IPv4 North America
IPv6 North America
IPv4 Oceania
IPv6 Oceania
IPv4 South America
IPv6 South America
IPv4 Proxy and Satellite
IPv6 Proxy and Satellite
IPv4 TOP 20
IPv6 TOP 20
Saving pfBlockerNG Reputation TAB
Country Code Update Ended - [ 08/15/16 21:24:37 ]–-----
tail -f pfblockerng.log
DNSBL - Adding Unbound custom 'include' option
Saving new DNSBL web server configuration to port [ 8081 and 8443 ]
Saving pfSense config…
VIP address configured. Widget Packet statistics reset.
Restarting Service DNSBL...**Saving configuration [ 08/15/16 19:16:28 ] …
Restarting Service DNSBL...and stays like this for 20 minutes.
-
Looks like the MaxMind database creation went ok.
Can you try to reinstall pfBlockerNG? -
Just did this:
install log looks like :
Upgrading pfSense-pkg-pfBlockerNG…
Updating pfSense-core repository catalogue...
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):Installed packages to be REINSTALLED:
pfSense-pkg-pfBlockerNG-2.1.1_2 [pfSense]Number of packages to be reinstalled: 1
[1/1] Reinstalling pfSense-pkg-pfBlockerNG-2.1.1_2…
[1/1] Extracting pfSense-pkg-pfBlockerNG-2.1.1_2: …....... done
Removing pfBlockerNG components...
Menu items... done.
Services... done.
Loading package instructions...
Removing pfBlockerNG...cat: /var/db/pfblockerng/dnsbl/.txt: No such file or directory
All customizations/data will be retained... done.
Saving updated package information...
overwrite!
Loading package configuration... done.
Configuring package components...
Loading package instructions...
Custom commands...
Executing custom_php_install_command()...
MaxMind GeoIP databases previously downloaded.
Adding pfBlockerNG Widget to the Dashboard... done.
Remove any existing and create link for DNSBL lighttpd executable... done.
Creating DNSBL web server start-up script... done.
Creating DNSBL web server config ... done.
Starting DNSBL Service... done.
Upgrading Adv. Inbound firewall rule settings ... no changes required ... done.
Custom commands completed ... done.
Executing custom_php_resync_config_command()...1 table created.
1/1 addresses added.
cat: /var/db/pfblockerng/dnsbl/.txt: No such file or directory
pkg: POST-INSTALL script failedCleaning up cache... done.
Success
just after the refresh i got a crash report:
Crash report begins. Anonymous machine information:
amd64
10.3-RELEASE-p5
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSenseCrash report details:
PHP Errors:
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP Fatal error: Allowed memory size of 104857600 bytes exhausted (tried to allocate 24 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3867
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP Stack trace:
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP 1. {main}() /etc/rc.start_packages:0
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP 2. sync_package() /etc/rc.start_packages:90
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP 3. eval() /etc/inc/pkg-utils.inc:631
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP 4. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3
[15-Aug-2016 21:57:31 Europe/Bucharest] PHP 5. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3867 -
Allowed memory size of 104857600 bytes exhausted (tried to allocate 24 bytes)
This tells me you only have 100M for memory limit.
What are the fixes you applied up to now to the system? -
/usr/local/pkg/pfblockerng/pfblockerng.inc
pfb_global();
// DNSBL Lighttpd HTTPS Daemon (Scans Lighttpd dnsbl_error.log for requested https domain names)
if (isset($argv[1]) && $argv[1] == 'dnsbl') {
set_time_limit(0);
pfb_livetail($pfb['dnserrlog'], 'dnsbl');
exit;
}and i guess is default.
and also usr/local/www/pfblockerng/pfblockerng.php - not modified.
-
And no modifications to /etc/inc/config.inc or /usr/local/etc/php.ini, /etc/rc.php_ini_setup ?
-
well based on my comments i did one to the first file:
// Set memory limit to 512M on amd64.
if ($ARCH == "amd64") {
ini_set("memory_limit", "512M");
} else {
ini_set("memory_limit", "256M"); # increased from 128M
}–--
-
This change only affect i386 systems, you are on a amd64.
Did you raise the System / Advanced / Firewall & NAT Firewall Maximum Table Entries ? -
no
will do now. what's a starting value?i had 5000000 now i have 50000000
-
I think 2000000 is the default, 50000000 should be more than enuf.
Do you see the pfblockerNG menu ?
BTW how much free memory do you have ? -
still not there.
i have deleted, restarted, reinstalled pfbloker.
27% of 8130 MiB free ram -
I changed the mem settings and the table settings and now I'm getting
>>> Upgrading pfSense-pkg-pfBlockerNG... Updating pfSense-core repository catalogue... pfSense-core repository is up-to-date. Updating pfSense repository catalogue... pfSense repository is up-to-date. All repositories are up-to-date. Checking integrity... done (0 conflicting) The following 1 package(s) will be affected (of 0 checked): Installed packages to be REINSTALLED: pfSense-pkg-pfBlockerNG-2.1.1_2 [pfSense] Number of packages to be reinstalled: 1 [1/1] Reinstalling pfSense-pkg-pfBlockerNG-2.1.1_2... [1/1] Extracting pfSense-pkg-pfBlockerNG-2.1.1_2: .......... done Removing pfBlockerNG components... Menu items... done. Services... done. Loading package instructions... Removing pfBlockerNG... All customizations/data will be retained... done. Saving updated package information... overwrite! Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()... MaxMind GeoIP databases previously downloaded. Adding pfBlockerNG Widget to the Dashboard... done. Remove any existing and create link for DNSBL lighttpd executable... done. Creating DNSBL web server start-up script... done. Creating DNSBL web server config ... done. Starting DNSBL Service... done. Upgrading Adv. Inbound firewall rule settings ... no changes required ... done. Custom commands completed ... done. Executing custom_php_resync_config_command()...1 table created. 1/1 addresses added. PHP ERROR: Type: 1, File: /usr/local/pkg/pfblockerng/pfblockerng.inc, Line: 3867, Message: Allowed memory size of 134217728 bytes exhausted (tried to allocate 72 bytes)pkg: POST-INSTALL script failed >>> Cleaning up cache... done. Success -
same line on which i have the crash reported
