Hardware:
Proxmox 8.2.2
VM - PfSense 2.7.2-Release
1x TP-Link TL-SG1016DE
1x TP-Link TL-SG108E-Gigabit (8-poorts)
1x TP-Link TL-SG105E-Gigabit (5-poorts)
Settings VM in Poxmox:
alt text
I have made some VLANS inside PfSense:
alt text
These are the settings of the VLANS (All are the same exept for the ip address)
alt text
alt text
Then i have added them to the interfaces:
alt text
I have edited them so they have a DHCP server:
(All of the settings are the same on each VLAN)
alt text
This is the IP Range of alle the VLANS:
VLAN 10 = Main network. 192.168.10.1
VLAN 20 = Kids network. 192.168.20.1
VLAN 30 = Security network. 192.168.30.1
VLAN 40 = Guest network. 192.168.40.1
There is no intereconnection between the VLANS, So that is working like i want to have it. But there is also no internet access on the VLANS either.
I can ping 8.8.8.8 or 1.1.1.1 but when i try to ping google.nl there is no answer. These are the firewall setings/Rules (They are all the same on each VLAN)
alt text
I dont know why, but at this point only the devices that are outside the VLAN (So on the native VLAN1) have internet without any problems.
The settings in the TP-LINK swichtes are right, since the devices inside the vlan are getting the right Ip Addresses.
The only thing i have changed in the basic setup is that i have installed AdGuard Home by this tutorial: Installing AdGuard Home on PFSense
Where is my mistake 😧