Add tagged and untagged VLANs

[bushtor]

Hello,
I would like the following setup for my Netgate SG-1100:
WAN / LAN ports: 'Normal' setup.
OPT port:
VLAN ID 11 Untagged
VLAN IDs 33, 44, 55 Tagged
How do I add these untagged and tagged VLANs..?
Thanks a lot for comments and help on this.
regards
Tor

[johnpoz]

@bushtor what your switch uses for untagged vlan pfsense has no care about. So your vlan 11 network would just be the normal IP setup on pfsense for the opt interface.

You would then create vlans on pfsense with those 33.44. and 55 IDs and assign them to the opt interface.

On your switch.. you would send vlan 11 untagged, with pvid set on that port as 11 as well. Then send 33,44 and 55 tagged..

[bushtor]

Thanks a lot :-)
Will try.....