VLAN an Firewall rule not matching
-
@interessierter why would you have that set? That would only ever be used if you were running multiple layer 3 on the same layer 2..
And that sure shouldn't have anything to do with the tables loading.
-
@johnpoz said in VLAN an Firewall rule not matching:
@interessierter yeah that there.. Well 2mil should be quite large, unless you have more aliases not showing?
non of my custom alias is showing. What should I set?
-
@interessierter what I would suggest is for testing turn off all your pfblocker aliases, since they can be large.. I would also turn off bogonV6 if you have that enabled. Also another one that can just be freaking huge.
I doubt that bypass firewall rules has anything to do with it.. Because I just set it, and still see my tables populated.. Even after filter reload. But unless you have specific use case for that - it shouldn't be enabled. It sure isn't enabled by default.. Not sure why you would of turned that on?
I would then do a filter reload - under status.. Do you see any errors on loading anything?
If your tables are not populated there is no way they could be used in rules..
-
@johnpoz said in VLAN an Firewall rule not matching:
@interessierter what I would suggest is for testing turn off all your pfblocker aliases, since they can be large.. I would also turn off bogonV6 if you have that enabled. Also another one that can just be freaking huge.
I doubt that bypass firewall rules has anything to do with it.. Because I just set it, and still see my tables populated.. Even after filter reload. But unless you have specific use case for that - it shouldn't be enabled. It sure isn't enabled by default.. Not sure why you would of turned that on?
I would then do a filter reload - under status.. Do you see any errors on loading anything?
If your tables are not populated there is no way they could be used in rules..
I get this one at the end:
Loading filter rules
Setting up logging information
Setting up SCRUB information
There were error(s) loading the rules: /tmp/rules.debug:135: could not parse host specification - The line in question reads [135]: rdr pass on igb2 inet6 proto tcp from any to ::1010101 port 80 -> ::1 port 8081 -
@interessierter said in VLAN an Firewall rule not matching:
There were error(s) loading the rules: /tmp/rules.debug:135: could not parse host specification - The line in question reads [135]: rdr pass on igb2 inet6 proto tcp from any to ::1010101 port 80 -> ::1 port 8081
Oh and the plot thickens..
What specific rule is that?
-
@johnpoz said in VLAN an Firewall rule not matching:
@interessierter said in VLAN an Firewall rule not matching:
There were error(s) loading the rules: /tmp/rules.debug:135: could not parse host specification - The line in question reads [135]: rdr pass on igb2 inet6 proto tcp from any to ::1010101 port 80 -> ::1 port 8081
Oh and the plot thickens..
What specific rule is that?
I guess we coming close. Today my Internet was working fine, after I removed and re-enabled the pfnblocker, my Internet was not working anymore. It seems like I deleted the DNS port rule from my lan last weekend, but it took now effect. Crazy
How to find out? I have no rule with 8081, and the normal Port 80 rule looks normal
-
@interessierter do you have your webgui on port 8081? I think there is a redirect for 80 to whatever the port is set too.
I have mine disabled.. But this was thing that came to mind that would redirect 80 like that.
-
@johnpoz said in VLAN an Firewall rule not matching:
@interessierter do you have your webgui on port 8081? I think there is a redirect for 80 to whatever the port is set too.
I have mine disabled.. But this was thing that came to mind that would redirect 80 like that.
no on 81, but that is maybe reason for 8081? I wonder about 41MB in this rule:
-
@interessierter hmmm.. No your antilock out is what would allow you to talk to the gui, that should always show traffic ;) if your accessing the gui
I can not find any rule like that in my setup..
But I did find this
https://forum.netgate.com/topic/165000/error-loading-firewall-rules -
@johnpoz said in VLAN an Firewall rule not matching:
@interessierter hmmm.. No your antilock out is what would allow you to talk to the gui, that should always show traffic ;) if your accessing the gui
I can not find any rule like that in my setup..
But I did find this
https://forum.netgate.com/topic/165000/error-loading-firewall-rulesI have now disabled the IPv6 in DNSBL Blocker, and the error message in the reload filter is away but: There are still no Firewall alias listed, not a single one :)
-
The firewall rules are now working and matching.
The alias is still not listed, but it's working as expected. Thanks for your help
