Trouble actually hitting the correct applet from external connection
-
@menethoran 503 points to your backend check failing, turn that off. I ran into sim problem with either ombi or overseerr, had to set check to none.
-
@johnpoz as in the health check? (that was already turned off).
BUT, i avoided the 503 error by changing my PfSense SSL port to 8443.
But, now im getting a 400 error, even when connecting with https its telling me im connecting via http
-
@menethoran well yeah if your going to be using ports for haproxy, you can't be using the ports on other services..
You trying to do this with shared frontend, I take it your doing ssl offloading, or your doing it on the cloud instance? Is it running on 443, some other port? like 9001, is that in the clear, or is that also https, where your trying to do a ssl frontend and also on the backend?
-
@johnpoz Home assistant created the nextcloud instance and puts it on port 9001 (it has something to do with KVM not allowing the assigning of ports below 9000 or something. I did a little research but quit when i found out the issue is currently "baked in".
I dont particularly care what port it all runs across, just want it to be secure (i cant do that with Ombi as i understand it because Ombi doesnt support SSL yet (as Ive read)).
So, preferably, id like to go to https://cloud.mydomain.com and have it end at my nextcloud instance at 192.168.2.2:9001
here are my front and backends.... figure its easier just to show you:
-
-
@menethoran you sure you can even setup nextclould without ssl?
So you can access locally with just http://192.168.2.2:9000?
-
@johnpoz no. but i can at: https://192.168.2.2:9001
http:// leads to a 400 error.weirdly, it looks like the SSL certificate is the one issued by TrueNAS
-
@menethoran well if you can not get to it without ssl, and your setup your backend to not be ssl, not how you would think it would work.
Either use ssl on the backend, or get nextcloud working without ssl, that you can load locally before you try setting it up with haproxy.
-
@johnpoz i wasnt trying to set up my backend (or front end for that matter) not to use SSL, i want ssl from start to finish with this one (again, ombi i dont care about as you cant use ssl... nextcloud is a bit different, and I definitely want SSL. I have ticked and unticked the (Encrypt)SSL and SSL checks. but neither seems to have any impact.
-
@menethoran your backend has to be set to use ssl if your going to use ssl with it.. And your frontend needs to be setup as ssl as well, etc.
I don't have anything setup that way.. Let me find something I can run through haproxy that would use a acme cert on the backend. Truenas cert doesn't seem correct and why would haproxy trust some selfsigned cert, etc.
edit: have a look around here for that question, I know its come up for ssl on the backend.. Here is one I found
https://forum.netgate.com/topic/142748/haproxy-ssl-mode-help-needed"Either add certificates and offloading to the haproxy frontend, or use ssl/tcp mode and use SNI for the webserver selection.. As the Host-header is not available when passing SSL along as-is."
-
@johnpoz honestly, i should have had WAY more experience with this stuff before getting this deep into it... so, i dont know.
It almost seems as if something is broken in the middle. Like, it seems to be coming into the network with SSL, gets forwarded almost correctly but (im guessing nginx) does something weird (im guessing nginx as thats what TrueNAS uses) and sends me almost like im going to an unsecured site. I see the https: corss out on the browser, and looking at the cert, it definitely isnt one ive ever created...
-
@menethoran read the thread I linked to @PiBa is the resident guru of guru's when it comes to HAproxy..
With my page of him, maybe he will drop by and smack some of his wisdom down..
BTW - going to move this to the proxy section..
-
-
@johnpoz sounds good!
Yeah, im already using real certificates (which looks like that was part of the problem in the other thread...)
-
@menethoran take note of not being able to pass it thru really directly, etc.
None of the stuff I have hosted with haproxy used ssl on the backend, I always just did the ssl offloaded to the frontend..
-
@johnpoz
OK, maybe im making this WAY more complicated than i need to. Once the traffic hits my network, i dont "really" care how secure it is as long as its encrypted coming in and going out. Can I in theory, just drop the SSL handling of the backend and leave it on the frontend? Or do i need the backend to have SLL because I have it set for SSL offloading? -
@menethoran the only issue, is I think nextcloud is pretty strict on wanting to use ssl. But sure if you can get it to load locally without ssl just by going to http://IPaddress:port then you could do whatever offloading you want on the front in haproxy.
-
@johnpoz actually, thats just it... I CANT hit it locally with HTTP, only HTTPS...
-
@johnpoz ![weird.jpg](/assets/uploads/files/1641936343948-weird-resize d.jpg)
-
@menethoran Then you have to setup haproxy frontent and backend using ssl, or you need to change nextcloud to only use http..
That is selfsigned cert, change it to use an acme cert on the nextcloud box.. Or I think there was a thread around here getting haproxy to use backend self signed certs?
-
@johnpoz honestly, im starting to think i need to go over to the TrueNAS guys and ask them why this whole thing is picking up their cert... I mean, i get that theres something wonky going on... and theres a good chance that part of it heavily involves PfSense, but i feel like maybe i dont understand (or we dont) how TrueNAS is handling the incoming traffic.
That make sense or am i grasping at straws here?
(And FYI: I refuse to run Nextcloud over a non-secured connection... not that you were telling me to go that direction, just letting you know where i stand)