Compatibilidad con tarjeta de red HP 331T
-
Buen dia, tengo una computadora con procesador Core i5 y pFsense 2.0.6, quiero agregarle una tarjeta de red de 4 puertos ethernet gigabit (HP 331T); esta tiene el chipset Broadcom BCM5719. He estado buscando información sobre la compatibilidad, he encontrado dos publicaciones, pero no me deja muy claro si es o no compatible la tarjeta. Agradecería sean mas específicos en su ayuda...
-
Revisa la lista de "Harware Soportado"
https://www.freebsd.org/releases/12.3R/hardware/#support
-
@ptt Gracias por tu comentario, pero ya he buscado algo y NO SON TAN ESPECIFICOS... revise este enlace por ejemplo...
https://forum.netgate.com/topic/159031/is-it-possible-to-use-nic-with-broadcom-bcm5719-chipset
Es por ese motivo que PEDI AYUDA.... si la pudiera solucionar pues no la pediría...!!!
-
https://www.freebsd.org/cgi/man.cgi?query=bge&apropos=0&sektion=4&manpath=FreeBSD+12.3-RELEASE&arch=default&format=html
The bge driver provides support for various NICs based on the Broadcom
BCM570x, 571x, 572x, 575x, 576x, 578x, 5776x and 5778x Gigabit Ethernet
controller chips and the 590x and 5779x Fast Ethernet controller chips.
All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
copper cable, except for the SysKonnect SK-9D41 which supports only
1000Mbps over multimode fiber. The BCM570x builds upon the technology of
the Alteon Tigon II. It has two R4000 CPU cores and is PCI v2.2 and PCI-
X v1.0 compliant. It supports IP, TCP and UDP checksum offload for both
receive and transmit, multiple RX and TX DMA rings for QoS applications,
rules-based receive filtering, and VLAN tag stripping/insertion as well
as a 256-bit multicast hash filter. Additional features may be provided
via value-add firmware updates. The BCM570x supports TBI (ten bit inter-
face) and GMII transceivers, which means it can be used with either cop-
per or 1000baseX fiber applications. Note however the device only sup-
ports a single speed in TBI mode.
Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411
10/100/1000 copper gigabit transceivers, which support autonegotiation of
10, 100 and 1000Mbps modes in full or half duplex.
The BCM5700, BCM5701, BCM5702, BCM5703, BCM5704, BCM5714, BCM5717,
BCM5719, BCM5720, BCM5780 and BCM57765 also support jumbo frames, which
can be configured via the interface MTU setting. Selecting an MTU larger
than 1500 bytes with the ifconfig(8) utility configures the adapter to
receive and transmit jumbo frames. Using jumbo frames can greatly im-
prove performance for certain tasks, such as file transfers and data
streaming. -
@ptt Si estimado, pero en la lista de hardware que me enviaste no esta este tipo de chipset, en el enlace que te envié no le dicen mas al amigo que pregunto, pero según leí también dicen que si. Por ese motivo es que envié este link, ya que aun no compro la tarjeta, quisiera saber si realmente la va a reconocer para poder solicitarla a mi proveedor
-
una tarjeta de red de 4 puertos ethernet gigabit (HP 331T); esta tiene el chipset Broadcom BCM5719
en la lista de hardware que me enviaste no esta este tipo de chipset
???
The bge driver provides support for various NICs based on the Broadcom
BCM570x, 571x, 572x, 575x, 576x, 578x, 5776x and 5778x Gigabit EthernetThe BCM5700, BCM5701, BCM5702, BCM5703, BCM5704, BCM5714, BCM5717,
BCM5719, BCM5720, BCM5780 and BCM57765 also support jumbo frames, which -
@ptt Mil disculpas, tienes razon.... entonces la compro sin pensarlo...!!! muchas gracias por tu valiosa ayuda mi estimado....|||
