Smoothwall 3.0 Noob Migrant
-
Hi guys,
Firstly appologies for the noob post but the more indepth firewalling has me lost. My setup has moved and the smoothie fell over for some reason =. Let me explain my internal network layout and hope that you can tell me where i went wrong.
As setup on the smoothwall btw:
WAN 10.0.0.2 ( Modem on 10.0.0.138 PPPoE never seemed to work =\ )
Internal Lan 192.168.1.0/24
Servers 192.168.3.0/24
Wireless Clients 192.168.5.0/24Can someone point me to how I would manage this to confirm if my networking skills have failed me yet again? I beleive I ran into problems with the two OPT interfaces as the LAN interface worked fantastically.
Cheers,
Kahn
-
Could you desribe what the problem is?
-
For some reason CPU utilization spiked and it appered as if there was a ethernet loopback but there was nothing detected by PFsense - perhaps i should try rebuild the config so we can post it and work from there?
-
You dont make much sense.
maybe you should describe:
1: what you have. (hardware, existing network layout)
2: what you want. (intended network layout)
3: what you already tried
4: what went wrong or doesnt work as expected.There is no point in throwing wild guesses about CPU utilisation around.